Acer G41tam Rev 10 Manual Extra Quality May 2026

No available public document includes:

For extra quality – the best you’ll get is a high-resolution scan of the board with labeled jumpers, from a collector or repair tech.

As of 2025, the original Acer support page for Veriton M275/M460 has been decommissioned. However, you can still source a high-quality manual via:

eBay Sellers of NOS Boards: Message sellers of “New Old Stock” G41T-AM Rev 1.0 boards; they often scan the included paper manual at 600 DPI and will share it.

What to avoid:

Pro Tip: If you find a 300+ DPI version, preserve it. Upload it to Archive.org with the tag extra-quality-manual to help the next technician. acer g41tam rev 10 manual extra quality

Here are some features that can be put together for the "Acer G41TAM Rev 10 manual extra quality":

Main Features:

Extra Quality Features:

Additional Features:

Download Information:

The 9-pin header is located at the bottom-right corner of the board.

| Pin | Signal | Pin | Signal | |-----|----------------|-----|---------------| | 1 | HDD LED (+) | 2 | Power LED (+) | | 3 | HDD LED (-) | 4 | Power LED (-) | | 5 | Ground | 6 | Power Switch | | 7 | Reset Switch | 8 | Ground | | 9 | +5V (key – missing pin) | | |

Polarity for LEDs is only for color; no damage if reversed. No available public document includes:

Acer’s official support site for the Veriton M670G or Aspire M3800 hosts a 2.4 MB PDF that is dark, un-searchable, and misses half the jumpers.

For extra quality, your best sources are:

Do not pay for "premium manual" sites—they just repackage the same low-quality Acer PDF.

The header is a 2x5 pin block. Rev 1.0 supports both standards. For extra quality – the best you’ll get

| Pin | Intel HD Audio (Default) | AC’97 Legacy | | :--- | :--- | :--- | | 1 | MIC2_L | MIC_IN | | 2 | GND | GND | | 3 | MIC2_R | MIC_BIAS | | 4 | -ACZ_DET | GND | | 5 | LINE2_R | FP_OUT_R | | 6 | GND | GND | | 7 | SENSE_SEND | +5V_AUDIO | | 8 | KEY (No pin) | KEY (No pin) | | 9 | LINE2_L | FP_OUT_L | | 10 | GND | GND |

Extra Quality Configuration: For an AC’97 chassis, you must change the setting in BIOS under Advanced > Onboard Devices > Front Panel Type to AC97. Otherwise, your mic won’t work.