Acer Q65h2-am V1.1 Manual Official

The board uses an InsydeH2O BIOS.

The Acer Q65H2-AM is a proprietary micro-ATX motherboard designed for Acer Aspire desktop systems. It is based on the Intel H61 Express Chipset (or similar Q65 variant depending on the specific CPU generation supported) and is designed to support Intel 2nd and 3rd Generation Core processors (Socket LGA 1155).

The Q65H2-AM supports Dual-Channel memory architecture.

Installation Guide:

The motherboard uses an onboard speaker (or connected case speaker) to diagnose hardware failures during startup. acer q65h2-am v1.1 manual

| Code | Meaning | Solution | | :--- | :--- | :--- | | 1 Long | No Memory Detected | Reseat RAM sticks. Try one stick at a time. | | 1 Long, 2 Short | Video Error | Reseat graphics card (if installed) or check monitor cable. | | Continuous Beeping | Power Supply Issue | Check 24-pin and 4-pin power connections. | | No Beeps / No Power | PSU or Motherboard | Verify wall outlet and PSU switch is ON. |

Only update using Acer’s official EXE for your case model – do not use generic motherboard BIOS files.

Enter BIOS: Press F2 repeatedly after power-on (some models use Del).

Boot menu: Press F12 at POST.

You need the manual to know which jumper does what. Here are the three jumpers on the Q65H2-AM v1.1:

Jumper J1: Clear CMOS

Jumper J9: BIOS Recovery/Configuration

Jumper J10: Chassis Intrusion Header

Power cycling after CMOS clear: After resetting, press the power button. The PC will turn on, off, then on again. This is normal memory retraining.

Acer removed many legacy product pages, but drivers/BIOS are still available via:

Alternative: Search for "Veriton X2630 service guide" – it contains the Q65H2-AM motherboard diagrams.

If you need the exact pinout diagram or help identifying your Veriton model from the serial number, share a photo of the case label (or any barcode with “SNID”/“Model No.”) – I can match it to the correct Acer service guide. The board uses an InsydeH2O BIOS