Inside every Epson inkjet printer is a “waste ink pad” – a sponge-like component that absorbs ink purged during cleaning cycles. The printer tracks how many cleaning cycles have been performed using an internal counter. When this counter reaches a predefined limit (usually around 15,000 to 20,000 pages or cleaning cycles), the printer triggers Error 39 and locks all functions.
Symptoms of Error 39:
Product: Service Required Software / Resetter Compatible Models: Epson Stylus SX115, Epson ME 30, ME 32 (often same core hardware) Version: 39 (Verified / Cracked) Purpose: Resets Waste Ink Pad Counter & initializes specific service modes.
Verification note: This method works only for Epson SX115 printers with original firmware version 1.xx or 2.xx. Address 39 is not the waste ink counter on all SX115 units—some use address 3A or 40. Always back up your EEPROM data first using the adjustment program’s "Backup" button. If the printer does not reset, do not force a write to address 39—this can corrupt the EEPROM and permanently brick the printer. adjustment program epson sx115 39 verified
In the lifecycle of any inkjet printer, there comes an inevitable, frustrating halt. For owners of the Epson Stylus SX115, this usually manifests as two blinking red lights and a cryptic service error message: "Parts inside your printer are at the end of their service life."
For the average user, this is a death sentence for the hardware. For the technician or the savvy DIYer, however, this is merely a software reset trigger. This is where the Epson SX115 Adjustment Program enters the conversation. But in the murky waters of firmware tools and utility software, the term "Verified" carries heavy weight.
This article explores the mechanics of the SX115 adjustment program, the reality of the "Waste Ink Pad" counter, and why finding a "verified" version of the tool is critical for the safety of your hardware. Inside every Epson inkjet printer is a “waste
In the menu, look for:
The program will display two values:
When Error 39 is active, both are likely at 100% or a maximum limit (e.g., 20000). Verification note: This method works only for Epson
If you own an Epson Stylus SX115, you are likely familiar with its reliability as an all-in-one printer. However, like most Epson inkjet printers, it has a built-in maintenance counter designed to protect the internal components from ink overflow. Eventually, you will encounter the dreaded "Service Required" error message, often accompanied by two red blinking lights.
When this happens, the official solution is usually a costly trip to a service center. However, many users turn to a software solution known as the Adjustment Program.
In this post, we discuss the "Adjustment Program Epson SX115 Ver. 39," what it does, and how to use it safely to reset your printer’s waste ink counter.
The Epson SX115, like most consumer inkjet printers, has a non-removable waste ink pad. After a set number of prints/cleanings, a counter fills up. The printer then locks completely, flashing a "Service Required" error (often 5 flashes on the ink lights). The Adjustment Program v.39 is the proprietary Epson service tool that resets this counter, bypassing the need to replace the mainboard or send the printer for service.