A single 5MP camera at H.265, 15 fps, medium quality uses ~12-18 GB per day.
By default, most ADN units use one of these:
Tool recommendation: Download “Advanced IP Scanner” (free). Run a scan of your subnet. Look for an open port 80 or 8000. adn564mp4 install
Alternatively, use the manufacturer’s SADP Tool (Search Active Devices Protocol). This is the gold standard for the ADN564MP4 install.
The ADN564MP4 requires an Ethernet cable (Cat5e or Cat6) for data + PoE. A single 5MP camera at H
Inside the box, you should verify the following components:
Pro Tip: Do not lose the small rubber sealing gasket. Without it, moisture will ruin the camera within weeks. By default, most ADN units use one of these:
The battery slides into the back until it clicks. Users occasionally report a stiff fit the first time, but this ensures a weather-tight seal.
The ADN564MP4 has a 2.8mm to 12mm varifocal lens (check your specific SKU). For an optimal install:
Warning: Do not install behind glass (e.g., a window). The IR LEDs will reflect and blind the sensor.
