Epson Sx230 Printer Resetter Adjustment Program
You cannot run the program while the printer is in normal mode. You must manually force it into the service mode key combination.
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | “Communication Error” | Printer not in service mode or USB driver issue | Repeat service mode key combo. Try different USB port (USB 2.0 preferred). | | “Timeout error” | Firewall/Antivirus blocking the program | Disable Windows Defender or third-party AV temporarily. | | “Check Sum Error” | Corrupted adjustment program or mismatched version | Re-download from a different source. Ensure it’s specifically for SX230 (not SX130). | | Counter resets to 100% immediately | Physical EEPROM is write-protected or failing | This is rare. You may need to replace the mainboard. | | Printer works, but lights flash again after 10 pages | You reset only one counter | Go back and check BOTH “Main” and “Borderless” counters. |
Drill a small hole in the printer’s side (search for "SX230 waste ink mod") and route a silicone tube from the internal pump to an external bottle. This allows waste ink to drain safely. epson sx230 printer resetter adjustment program
Prerequisites:
Epson does not endorse the use of adjustment programs by end users. Resetting the counter violates your printer’s intended lifecycle and may void any remaining warranty. However, in many jurisdictions (including the EU and US under right-to-repair laws), you are legally permitted to perform maintenance on your own device. You cannot run the program while the printer
The adjustment program is not a crack for ink cartridges. It does not bypass cartridge recognition or refill detection. You will still need working ink cartridges.
Important: The program resets the counter, not the pad. If your pad is genuinely saturated, resetting the counter without replacing the pad will eventually lead to ink leaking out of the printer’s bottom vents. The resetter is a temporary fix unless you also perform a manual pad replacement or external waste tank mod. Drill a small hole in the printer’s side
You cannot just double-click this program. It requires a specific ritual.