Lay your TV face-down on a clean, soft surface (blanket or foam).
Warning: For 100-inch TVs, use all 4 screws per bracket. Do not skip corners.
⚠️ Warning:
Tools you’ll need (not included):
Use a stud finder to locate two studs (16″ or 24″ apart).
Mark the desired center height of the TV (usually eye level when seated).
Hold the wall plate against the wall at that height, level it, and mark the screw holes over the studs.
If mounting on concrete/brick: skip studs and use concrete anchors (pre-drill holes). equatech universal tv wall mount 32 to 100 instructions
When you invest in a large flat-screen television—ranging from 32 inches to a massive 100 inches—choosing the right mounting solution is critical. The Equatech Universal TV Wall Mount has become a popular choice among homeowners and installers for its robust build, universal compatibility (VESA standards), and sleek low-profile or full-motion designs.
However, a wall mount is only as good as its installation. Poorly mounted large TVs are a safety hazard, leading to damaged walls, broken screens, or serious injury.
This article provides a detailed, step-by-step walkthrough of the Equatech Universal TV Wall Mount instructions for 32-100 inch TVs. We will cover tools required, wall compatibility, VESA patterns, step-by-step installation, cable management, and troubleshooting.
Disclaimer: This guide covers general Equatech universal mount instructions. Always read the specific manual included with your product, as minor variations exist between fixed, tilt, and full-motion models.
While a confident DIYer can install a 65-inch TV with Equatech’s clear instructions, a 100-inch TV is a different challenge. These TVs often weigh 50 kg (110 lbs) or more, and the leverage on a full-motion arm can exceed 300 kg of pull on the top bolts. Lay your TV face-down on a clean, soft
If you are unsure about stud finding, drilling into concrete, or lifting the TV safely, hire a professional installer. Equatech mounts are excellent, but human error remains the leading cause of TV falls.
By following this guide—measuring twice, using the correct hardware, and never rushing—your Equatech universal TV wall mount will provide years of safe, elegant viewing for your 32 to 100-inch television.
Need further help?
Visit the official Equatech support website for model-specific video tutorials or contact their helpline with your mount’s serial number. Keep your instruction manual in a safe place (or photograph it) for future adjustments or moving.
Enjoy your perfectly mounted screen.
: Electric drill, stud finder, spirit level, tape measure, pencil, and a screwdriver (typically Phillips head). Safety First : TV mounting is a two-person job , especially for larger screens. Protect the Screen Warning: For 100-inch TVs, use all 4 screws per bracket
: Lay your TV face down on a soft surface like a rug or bed to avoid scratches while attaching the brackets. Step-by-Step Installation Instructions 1. Attach Brackets to the TV
How To Wall Mount Your TV: A Step-By-Step Guide | Taskrabbit
Do not rely on the small included Allen key alone. For a safe installation, gather:
Lay your TV face-down on a soft, clean surface (blanket or cardboard).
Locate the four VESA mounting holes on the back of the TV.
Test which screws fit:
Attach left and right TV brackets to the back of the TV – do not tighten fully yet; keep them loose enough to slide left/right.