Firmware Version Dwr-m960-v1.1.49 [ Mobile ]
A solid, no-surprises maintenance release.
If your DWR-M960 is already running 1.1.46 or newer, you can skip this update unless you need the minor LTE reconnection fix. For users on older firmware, this version delivers noticeable improvements in reliability without introducing regressions. Power users dependent on band locking or VPN performance should consider third-party firmware instead.
Stability score: 8.7/10
Security score: 7.5/10 (lacks patches for 2024 CVEs, but none critical for home/SOHO use)
Some users report that IPv6 stops forwarding to LAN clients after 24 hours. Workaround: Under Advanced → IPv6, set the mode to “Link-Local Only” or disable IPv6 entirely if your ISP doesn’t use it. firmware version dwr-m960-v1.1.49
Industrial router firmware is frequently targeted by botnets (e.g., Mirai, Mozi). Common vulnerabilities patched in high-number versions like .49 include:
Before upgrading to v1.1.49, verify what is currently running on your router. A solid, no-surprises maintenance release
If you see anything lower than 1.1.49 (e.g., v1.0.22, v1.1.12, v1.1.38), you should prepare to update immediately. If you are on v1.2.0 or higher, do not downgrade to v1.1.49, as the bootloader may differ.
Version 1.1.49 is a maintenance and security-focused release for the DWR-M960. It does not introduce major new features but refines existing LTE stability, fixes several web interface bugs, and addresses low-severity security hardening. Users upgrading from versions prior to 1.1.40 will notice improved session handling and fewer random cellular disconnects. If you see anything lower than 1
| Issue | Workaround / Fix | |--------|------------------| | Router reboots once every 1–2 days | Downgrade to V1.1.40 (if D-Link still provides it) or upgrade to V1.2.x | | 4G speed drops after 24 hours | Toggle “Mobile Data” off/on in web interface or set a daily 4AM reboot schedule | | Cannot access admin page over Wi-Fi | Use Ethernet; reset to factory defaults (pin hole for 10 sec) | | SIM card not detected after power outage | Re-seat SIM card and reboot; update to newer firmware if available |
The firmware version V1.1.49 indicates a specific software iteration for the DWR-M960 device. Firmware versions are crucial for the performance, security, and functionality of the device:
Even with careful steps, things can go wrong. Here is how to recover.