Gamepad 8710 Manual May 2026
To ensure your Gamepad 8710 works perfectly:
Open Game Controllers:
Calibration:
Button mapping (using x360ce):
The Gamepad 8710 is a surprisingly durable controller if you treat it well. To extend its life:
If you are still stuck, remember that the 8710 chipset is a derivative of the classic “USB Gamepad 2AX” reference design. Any instructions for “Wireless DualShock-like PC controller” will likely apply.
Now go play your games. You no longer need the original gamepad 8710 manual — you have this guide.
Last updated: October 2025. Covers Windows 11, Android 14, and Steam Deck compatibility via USB-C hub.
PowerLead PG8710 (often listed as Gamepad-8710 ) is a wireless Bluetooth 4.0 controller designed primarily for Android and iOS mobile devices. Quick Setup & Pairing
To pair the device, first ensure Bluetooth is enabled on your smartphone or tablet, then use the following button combinations to enter the correct mode for your device: Android Devices : Press and hold
for 2 seconds. The LED 1 indicator will flash rapidly. Search for " Gamepad-8710 " in your Bluetooth settings and select it to connect iOS Devices (iOS 13.4 and below) : Press and hold
for 2 seconds. The LED 2 indicator will flash rapidly. Search for " Gamepad-8710 " in your device's Bluetooth settings gamepad 8710 manual
Note: This controller is generally incompatible with iOS versions 13.4 or higher. iOS iCade Mode : Press and hold
to enter iCade mode (specifically for older iOS arcade titles). LED 1 and LED 2 will light up. Mode Switching (Android)
Once connected to an Android device, you can switch between different input modes by holding and another button simultaneously: Keyboard Mode : HOME + A (LED 3 lights up). Joystick Mode : HOME + X (LED 1 lights up). Mouse Mode : HOME + Y (LED 1 and LED 3 light up). Key Specifications
: 350mAh rechargeable battery providing roughly 10+ hours of continuous playtime. Connectivity : Bluetooth 4.0 with an approximate 8-meter range.
: Features a telescopic stand that can hold smartphones up to 6 inches wide. : Typically uses a micro-USB cable for recharging. Troubleshooting Device not found
: Try restarting your phone's Bluetooth or resetting the controller by toggling the ON/OFF switch. Connection drops
: Ensure the controller is fully charged; low battery can cause intermittent signal loss.
: While designed for mobile, it can work with a PC if you have a compatible Bluetooth adapter. 23 Nov 2020 —
The Gamepad 8710 (often branded as the PowerLead PG8710) is a versatile, wireless Bluetooth controller designed primarily for mobile gaming on Android and iOS devices. It features an ergonomic layout similar to an Xbox controller and includes a built-in telescopic phone holder. 🛠️ Getting Started
Before first use, ensure the device is fully charged using the included micro-USB cable. In the Box 1x Gamepad 8710 Controller 1x Micro-USB Charging Cable 1x User Manual (English/Japanese) 📱 Pairing and Connectivity
The 8710 uses Bluetooth 4.0 to connect to devices within an 8-meter range. Power On: Slide the power switch to the ON position. Enter Pairing Mode: The LED indicators will begin to flash. To ensure your Gamepad 8710 works perfectly: Open
Select Device: On your phone/tablet, search for Bluetooth devices and select "gamepad-8710" to connect. Confirmation: Once connected, the LED will remain solid. 🕹️ Operating Modes
The 8710 features different modes for various operating systems. Switch between them by holding the Home button and a corresponding Face Button (A/B/X/Y) simultaneously. For Android
Home + X (Joystick Mode): Standard mode for most Android games and emulators. (LED 1 lights up)
Home + A (Keyboard Mode): Best for apps requiring keyboard-style inputs. (LED 3 lights up)
Home + Y (Mouse Mode): Allows the right stick to control a cursor on the screen. (LED 1 & 3 light up) For iOS
Home + B (iCade Mode): Specifically for older iOS arcade games. Note: The 8710 may have limited compatibility with newer versions of iOS (v13.4+ may not support all features). 🔋 Power Management
Battery Life: Offers approximately 10+ hours of continuous play on a full charge.
Auto-Sleep: The controller enters a power-saving mode if left idle for several minutes.
Recharging: Connect to any standard 5V USB port. The LEDs will indicate the charging status. ⚠️ Troubleshooting
Not Connecting: Restart your device's Bluetooth and power cycle the controller. Ensure no other Bluetooth devices are interfering.
Stick Drift/Responsiveness: Use a Gamepad Tester on a PC to verify if buttons are registering correctly (0 for unpressed, 1 for pressed). Calibration:
Game Compatibility: Not all mobile games support external controllers natively. Some may require third-party mapping software like ShootingPlus V3. If you'd like to dive deeper, let me know: Are you using iOS or Android? Do you need help remapping buttons for a specific game?
Are you experiencing any hardware issues like stuck joysticks?
PowerLead PG8710 (often identified in Bluetooth settings simply as "gamepad-8710") is a versatile, wireless Bluetooth 4.0 controller designed primarily for mobile gaming on Android and iOS devices. It is frequently found under various generic brandings but follows a consistent set of operational instructions for pairing and mode switching. Core Specifications Connectivity: Bluetooth 4.0 with a range of up to 8–10 metres.
Built-in 400mAh lithium battery providing ~10 hours of continuous play.
Ergonomic grip with a telescopic bracket that supports devices up to 6 inches wide. Compatibility:
Android 6.0+ and iOS 11.3+ (note: compatibility may be limited on iOS 13.4 or later). Quick Start & Pairing Guide
To connect the gamepad, you must use specific button combinations to enter the correct pairing mode for your device. Android Mode: button and then press for 2 seconds. LED 1 will flash rapidly. "gamepad-8710" in your device’s Bluetooth settings. iOS Mode (iCade): button and then press for 2 seconds. LED 1 and LED 2 will flash. Search for the device and pair. Powering Off: Press and hold the
button for approximately 5 seconds until the LED lights turn off. Operating Modes
The controller supports multiple "input" modes to ensure compatibility with different game types: オリジンコム Joystick Mode (Home + X): Best for standard racing and role-playing games on Android. Keyboard Mode (Home + A): Assigns buttons to keyboard keys. Mouse Mode (Home + Y): Allows the joystick to control a cursor on Android devices. Charging & Maintenance
Use the included micro-USB cable to connect to a 5V power source (PC or wall adapter). The LED indicator stays on while charging and turns off when the battery is full. Power Saving:
The device will automatically enter sleep mode after 5 minutes of inactivity to conserve battery.
Logicool Wireless Gamepad Controller F710 F710r F/S Japan New
If you’ve changed modes and forgotten what’s what: