| Parameter | Standard Setting | Extra Quality Setting | | :--- | :--- | :--- | | Mode | Standard / Draft | High Quality (HQ) | | Speed | 50+ cm/s | 10 - 25 cm/s | | Acceleration | High | Low / Medium | | Blade Tip | Standard Carbide | Polished / High-Precision | | Offset | Default | Calibrated precisely |
Absolutely. Whether you are operating a CE6000-60, a CE7000-130, or a legacy model, the Graphtec CE100060 Extra Quality is the single most cost-effective upgrade you can make.
Standard blades cut vinyl. Extra Quality blades preserve your material, reduce waste, silence your machine (by reducing friction hum), and allow you to tackle thicker, more lucrative substrates.
If you have been frustrated by tearing, frayed edges, or blades that dull after one sheet of reflective vinyl, stop settling for mediocrity. Invest in the Graphtec CE100060 Extra Quality today. Your plotter—and your profit margin—will thank you. graphtec ce100060 extra quality
Ready to upgrade? Check your Graphtec model compatibility and order a 5-pack of CE100060 Extra Quality blades to ensure you never face downtime again.
Meta Description: Discover the power of the Graphtec CE100060 Extra Quality blade. Unlock 3x longer life, perfect weedable cuts, and compatibility with thick vinyl & film. Installation guide & tips inside.
Tags: Graphtec CE100060 Extra Quality, Graphtec blade, CE6000 blade, 60 degree vinyl cutter blade, extra quality cutter, vinyl plotting consumables. | Parameter | Standard Setting | Extra Quality
The Graphtec CE1000-60 (part of the CE1000 series) is known for its balance of speed and force. However, when cutting intricate designs, small text, or thick materials, standard settings can result in "feathering" at corners or uneven edges. Engaging the machine's quality-focused settings ensures a professional finish.
Here is how to configure the CE1000-60 for Extra Quality results.
There is nothing worse than a cut that looks fine but weeding (removing excess vinyl) is a nightmare. The Extra Quality blade provides a cleaner kerf—the width of the cut. Because the edge is sharper and held to tighter tolerances, the kiss-cut is smoother. You will notice: Meta Description: Discover the power of the Graphtec
| Feature | Standard CE100060 | CE100060 Extra Quality | | :--- | :--- | :--- | | Max Cutting Speed | 70 cm/s | 45 cm/s (optimized) | | Blade Pressure Steps | 48 steps | 96 micro-steps | | Minimum Character Size | 5mm | 1.5mm (Caliper 80 vinyl) | | Weeding Efficiency | Good | Excellent (No lifted corners) | | Contour Cut Accuracy | ±0.2mm | ±0.05mm |
For extra quality, reduce speed even if the machine can go faster.
| Material | Speed (cm/s) | Quality effect | |----------|--------------|----------------| | Standard vinyl | 20–30 | Clean edges | | Small text (< 5 mm) | 5–10 | Prevents lifting | | Reflective / thick | 3–5 | No chatter marks |
Speed vs force rule: Increase force first, then lower speed only if edges are rough.
© 2026 Quiz And Survey Master
