Gwx 75: Installation Manual

| Item | Quantity | Notes | |------|----------|-------| | Adjustable wrench (10–24 mm) | 1 | For flange bolts | | Torque wrench (30–80 Nm) | 1 | Critical for gasket seal | | PTFE tape & pipe sealant | 1 roll each | Use only on non‑metallic threads | | LOTO lockout kit | 1 set | Mandatory for safety | | Pressure gauge (0‑10 bar) | 1 | For hydro‑test | | Electrical multimeter | 1 | Verify voltage & continuity | | Manufacturer’s wiring harness | Included | Do not substitute | | Level & plumb line | 1 each | Ensure unit is perfectly horizontal | | Personal PPE (gloves, safety glasses, ear protection) | As needed | Follow Section 1 |

The GWX 75’s installation manual often includes a URL or QR code for the latest firmware. As of recent revisions, firmware v2.4.1 fixes an issue where the analog output would drift above 50°C. gwx 75 installation manual

To update (from manual):

Direct quote from typical GWX 75 manual: “Do not run low-voltage signal wires in the same conduit as AC power wires. Minimum separation: 200mm.” | Item | Quantity | Notes | |------|----------|-------|