Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 May 2026
Do not use generic AHCI drivers. You must use HPE’s signed driver for the S100i.
As of today, the current version is 1.2.30.0 (revision A). Download the .exe or .zip file. If using a zip, extract it to a USB flash drive.
Direct link tip: Search for “S100i Windows Server 2022 driver” on the HPE support site — avoid third-party driver sites.
Always keep your SPP updated. The latest SPP includes the S100i driver for Windows Server 2022 and simplifies maintenance.
The driver will inject, and your logical drive should instantly appear. Proceed with normal installation.
If you are installing via a USB/ISO media and not using Intelligent Provisioning, follow these steps:
Boot the Server:
Load Driver:
Continue Installation:
To ensure the driver functions correctly, verify the controller mode in the BIOS (F9 at boot): hpe smart array s100i sr gen10 driver windows server 2022
Informative Report: HPE Smart Array S100i SR Gen10 Driver for Windows Server 2022
Introduction
The HPE Smart Array S100i SR Gen10 is a high-performance, enterprise-class storage controller designed for HPE ProLiant Gen10 servers. This report provides information on the driver for the HPE Smart Array S100i SR Gen10 controller on Windows Server 2022.
Driver Overview
The HPE Smart Array S100i SR Gen10 driver for Windows Server 2022 is a software component that enables the operating system to communicate with the storage controller. The driver provides a range of features, including:
Driver Details
Installation and Configuration
To install the driver on Windows Server 2022:
Recommendations and Best Practices
Troubleshooting
Common issues and solutions:
Conclusion
The HPE Smart Array S100i SR Gen10 driver for Windows Server 2022 provides a reliable and high-performance storage solution for HPE ProLiant Gen10 servers. By following the installation and configuration guidelines, and staying up-to-date with the latest driver versions, administrators can ensure optimal performance and data protection for their storage environment.
The HPE Smart Array S100i SR Gen10 is an entry-level, software-based SATA RAID solution designed for HPE ProLiant Gen10 servers. For Windows Server 2022, HPE provides a dedicated Smart Array S100i SR Gen10 SW RAID Driver that must be manually loaded during OS installation if not using Intelligent Provisioning. Key Specifications & Support Supported OS: Windows Server 2016, 2019, and 2022.
RAID Levels: Supports RAID 0, 1, 5, and 10 for up to 14 SATA drives.
Boot Mode: Requires UEFI Boot Mode; it does not support Legacy BIOS.
Driver Version: The latest validated driver for Windows Server 2022 is often 1010.14.0.0(C) or newer. OS Installation Guide
Because the S100i is a software RAID controller, its driver is not included in standard Windows Server 2022 installation media. To install the OS, use one of the following methods: Assisted Installation (Recommended): Use HPE Intelligent Provisioning (F10 during boot). Do not use generic AHCI drivers
This tool automatically injects the necessary storage drivers, ensuring the Windows installer recognizes your logical drive. Manual Driver Injection:
Download the S100i SR Gen10 SW RAID Driver for Windows Server 2022 from the HPE Support Center. Extract the .exe contents to a USB drive.
During the "Where do you want to install Windows?" step, click Load Driver and browse to the folder on your USB drive.
Once loaded, your RAID array should appear as a valid installation target. Management Tools
To monitor and configure your arrays within Windows, you should install the HPE Smart Storage Administrator (SSA). This utility allows you to perform online capacity expansion and check drive health directly from the desktop.
Before initiating the driver installation, ensure the following requirements are met:
Do not rely on the default Windows Server 2022 installation media drivers.
During a clean install of Windows Server 2022, the setup might detect a generic storage controller and allow installation to proceed. However, using the generic Microsoft driver instead of the specific HPE driver often results in:
You must supply the specific HPE driver during the Windows Setup phase (the "Load Driver" screen). As of today, the current version is 1