The Huawei E5573 drivers for Windows 10 are not mythical or hard to find – they are likely already on your portable hotspot’s internal storage. The key is understanding that USB tethering is optional, and Wi-Fi remains the most trouble-free method.
However, when USB tethering is required (e.g., for a PC without Wi-Fi, or for a more stable, latency-sensitive connection), the NDIS driver installation is straightforward if you follow the steps outlined above. Avoid third-party driver sites, trust Windows’ built-in capabilities, and when in doubt, use the web interface to switch USB modes.
With the right drivers, the Huawei E5573 transforms from a mere travel router into a robust, always-on 4G backup adapter for your Windows 10 PC – no configuration, no fuss, just reliable internet anywhere.
Further Resources:
Last updated: For Windows 10 version 22H2 and all E5573 variants (E5573s-320, E5573s-856, E5573Cs-609, E5573Bs-520).
Title: Overcoming Driver Hurdles: The Huawei E5573 and Windows 10
Introduction The Huawei E5573 is a popular portable 4G LTE mobile hotspot (MiFi) that allows users to create a Wi-Fi network from a cellular data connection. While primarily designed for wireless connections, many users attempt to connect the device directly to a Windows 10 PC via USB to achieve a tethered, low-latency internet connection or to access the device’s administrative interface. However, a common frustration arises when Windows 10 fails to recognize the device, leading to the search for “Huawei E5573 drivers for Windows 10.” This essay explores the nature of the driver issue, the correct approach to solving it, and best practices for maintaining a stable connection.
The Misconception of Drivers Unlike older USB modems that required complex manual driver installations, the Huawei E5573 is designed as a Network Interface Device (NDIS). In theory, Windows 10 should automatically install the required drivers via Windows Update when the device is plugged in. The challenge begins when Windows fails to automatically identify the device, listing it instead as an “Unknown USB Device” or a generic serial port. This usually occurs due to corrupted Windows Update caches, the USB port delivering insufficient power (common on older laptops), or interference from previously installed modem software.
The Primary Solution: Windows Update and NDIS For the vast majority of users, Windows 10 already contains the necessary drivers under the Remote NDIS based Internet Sharing Device class. When the E5573 is set to “USB Tethering” mode (enabled in its web interface), Windows 10 should automatically load this driver. If it does not, the most reliable solution is not to seek a standalone driver file from third-party websites—which often carry malware—but to force Windows Update to search for the driver. This is done by navigating to Device Manager > Right-click the unknown device > Update driver > Search automatically for drivers. Windows 10 will then download the official Microsoft-supplied NDIS driver, and the E5573 will appear as a standard Ethernet connection under Network Connections.
Alternative Approaches and Legacy Tools In cases where Windows Update fails (e.g., offline systems or enterprise-managed PCs), users may turn to Huawei’s proprietary dashboard software, such as Mobile Partner or the HiLink app. These packages contain legacy drivers compatible with Windows 10. However, users must download these only from Huawei’s official support pages or reputable archives, as many third-party “driver download” sites bundle adware. Another simple workaround is to bypass drivers entirely: since the Huawei E5573 is a Wi-Fi hotspot, connecting via standard wireless LAN requires no drivers at all, making USB tethering a secondary, optional feature.
Troubleshooting Common Errors When the device remains unrecognized, several steps resolve the issue:
Conclusion While the Huawei E5573 is not impossible to use with Windows 10, the search for “drivers” is often a red herring. Microsoft’s built-in NDIS driver solves almost all cases, provided the device is correctly configured. Users should avoid third-party driver download sites and instead rely on Windows Update or official Huawei tools. Ultimately, for straightforward use, Wi-Fi connectivity remains the most driver-free and reliable method. However, for those requiring a wired USB connection, understanding the Remote NDIS framework transforms a frustrating hunt into a manageable technical task.
For users of the Huawei E5573 mobile Wi-Fi device on Windows 10
, specific drivers are necessary for a stable USB connection and modem functionality. Driver Installation Guide Virtual CD-ROM AutoRun
typically contains built-in drivers. When you connect it to your PC via USB, a virtual CD drive should appear. You can open this drive and run AutoRun.exe to begin the automated installation. Huawei PC Manager
: For the most up-to-date official drivers, it is recommended to use the HUAWEI PC Manager
. This tool can automatically detect your device and install the required Huawei Mobile Broadband drivers. One-Click Driver Tool : Huawei offers a specific One-click Driver Download Tool
for manual driver package retrieval if the automatic method fails. Manual Device Manager Update
: If the device is not recognized, right-click the Start button, select Device Manager , click on your computer name, and choose Action > Scan for hardware changes to prompt Windows to find the driver. Device Management Tools HuwiManage - Free download and install on Windows
Huawei E5573 Drivers for Windows 10: A Comprehensive Report
Introduction
The Huawei E5573 is a popular mobile broadband modem used for internet connectivity on-the-go. To ensure seamless functionality on Windows 10, it's essential to install the correct drivers. This report provides an overview of the Huawei E5573 drivers for Windows 10, including download links, installation procedures, and troubleshooting tips.
Driver Information
Downloading and Installing Drivers
Installation Steps:
Troubleshooting Tips:
Conclusion
In conclusion, installing the correct Huawei E5573 drivers on Windows 10 is essential for optimal performance and functionality. By following the steps outlined in this report, users can easily download, install, and troubleshoot the drivers. If issues persist, it's recommended to contact Huawei support or seek assistance from a qualified technical expert.
Recommendations
By following these guidelines, users can enjoy seamless internet connectivity on their Windows 10 systems using the Huawei E5573 modem.
Most Huawei E5573 models come with a small amount of internal storage containing a "virtual CD drive." Connect your device via a high-quality USB cable. File Explorer and look for a drive labeled "Mobile WiFi" or similar. Right-click AutoRun.exe and select Run as Administrator 2. Manual Driver Installation
If the device doesn't auto-install, you can use the official HUAWEI Mobile USB Driver Download the driver package (often labeled Huawei_Mobile_Driver_v1.0.exe 5.05.01.00 Right-click the setup file and choose Run as Administrator Follow the wizard: Click Restart your computer once the "Finish" button appears. 3. Troubleshooting "Device Not Recognized"
If your Windows 10 PC still shows a "Code 10" or "Unknown Device" error in Device Manager: The FC Serial Fix
: Sometimes you need to manually copy specific driver files. In some advanced cases, users have successfully fixed detection issues by copying files like FCSerialDrv C:\Windows\SysWOW64 Registry Patch : Some unlocking and driver tools include a huawei e5573 drivers windows 10
file specifically designed to fix "Error Code 10" on Windows 10. HUAWEI PC Manager : For Huawei laptop users, the official HUAWEI PC Manager
tool can automatically scan and update these drivers under the "Optimization" or "Drivers" section. 4. Pro Tip: Use the Web Interface
If you can't get the USB connection to work, you can skip drivers entirely by connecting via Wi-Fi.
Search for the device's Wi-Fi network and connect using the password under the battery cover. Open your browser and go to 192.168.8.1 (the default IP).
Log in to manage settings, check data usage, and send SMS directly from the web dashboard. Still stuck?
If your PC is completely ignoring the device, try a different USB port (preferably USB 2.0) or check if your cable is "charge-only" instead of a data cable. What worked for you? Let us know in the comments! Need more help
with specific firmware updates or unlocking your E5573 for other networks? Let me know your exact model number (like E5573s-320 or E5573cs-322). Huawei Modem not working in Win 10
The Huawei E5573 (including popular variants like the ) is a legacy 4G LTE mobile Wi-Fi hotspot that generally functions as a plug-and-play device on Windows 10. Driver & Setup Overview
On modern Windows 10 builds, you typically do not need to hunt for manual driver installers.
Plug-and-Play (HiLink): When connected via USB, the device usually emulates a CD drive containing the "MobileBroadband" setup. Running this installer automatically configures the necessary NDIS (Network Device Interface Specification) drivers.
Web Interface: Most users skip USB drivers entirely and manage the device via Wi-Fi by visiting 192.168.8.1 in a browser. This is the most stable way to use the device on Windows 10. Common Issues & Fixes
If the device is not recognized by Windows 10, it is usually due to the OS failing to switch the device from "Mass Storage Mode" to "Modem Mode."
Manual Driver Updates: If the device appears in Device Manager with a yellow exclamation mark (often under "Other Devices" as "Huawei Mobile"), you may need the Huawei HiSuite software. Installing HiSuite is the most reliable way to force-install the correct signed drivers for Windows 10.
COM Port Issues: For advanced users trying to "unbrick" or change firmware, Windows 10 often requires a specific "Huawei Port" driver to recognize the FC - PC UI Interface.
Power Management: A common "review" complaint is the device disconnecting. This is often fixed by going to Device Manager > Network Adapters > Huawei Mobile Connect, right-clicking Properties, and disabling "Allow the computer to turn off this device to save power." Verdict As of 2026, the
is an aging but capable device. While it was originally designed for Windows 7/8, its reliance on standard NDIS protocols makes it compatible with Windows 10 without needing third-party driver packs, provided you use the Huawei HiLink web interface or HiSuite for the initial handshake.
When Windows Update fails, you need the official driver package. Huawei does not provide a single .exe file for the E5573 on their consumer website. Instead, the driver is embedded in the HiLink firmware of the device. Here’s how to extract and install it manually.
If you want, I can:
Related search suggestions: functions.RelatedSearchTerms( "suggestions": ["suggestion":"Huawei E5573 drivers Windows 10 download","score":0.9,"suggestion":"E5573s-320 firmware and drivers","score":0.7,"suggestion":"Huawei Mobile Partner Windows 10 E5573","score":0.6] )
Connecting your Huawei E5573 Go to product viewer dialog for this item.
Mobile Wi-Fi to a Windows 10 PC via USB allows for faster data speeds and charging while you work. However, if your computer doesn't recognise the device, you likely need to install or update the specific drivers for this modem. How to Install Huawei E5573 Drivers on Windows 10 Most Huawei modems, including the
, have a "plug and play" feature that contains the necessary installation files within the device itself. Direct Plug-in Method: Connect your to your PC using a high-quality USB cable.
Wait for the computer to detect a new "Virtual CD Drive" in File Explorer.
Open that drive and double-click setup.exe or AutoRun.exe to begin the Background Driver Installation. Manual Installation via Device Manager: Right-click the Start button and select Device Manager.
Look for "Other Devices" or "Portable Devices" with a yellow warning triangle.
Right-click the device and select Update driver > Browse my computer for drivers.
Point the search to C:\Program Files (x86)\HUAWEI M2M Driver\Driver\ if you have previously attempted an installation. Downloading Official Drivers and Tools
If the automatic installation fails, you can use official Huawei software to fetch the correct files:
HUAWEI PC Manager: This is the recommended tool for managing and Updating Official Drivers automatically.
Huawei DriverTools: A dedicated One-click Driver Download Tool available on the Huawei support site for Windows 10 versions 2004 or later. Common Issues & Troubleshooting Install OEM USB drivers | Android Studio
The rain drummed against the window of Mark’s small apartment, a rhythmic tapping that matched the frantic clicking of his mouse. It was 2:00 AM, and the deadline for his final architecture project was looming like a shadow. He had the renders, the blueprints, and the soul of a masterpiece—all trapped on a laptop that refused to acknowledge the existence of the internet.
His home Wi-Fi had breathed its last breath three hours ago, a casualty of the storm. Mark’s only hope was a small, dusty plastic rectangle sitting on his desk: the Huawei E5573 4G Hotspot
"Come on, old friend," Mark whispered, plugging the device into his Windows 10 machine. The Huawei E5573 drivers for Windows 10 are
He expected the familiar chime of a successful USB connection. Instead, he got the dreaded silence of a "Device Not Recognized" error. The laptop saw a piece of plastic; it didn’t see a gateway to the world. The drivers were missing, lost in some digital purgatory between the old era of Windows 7 and the strict architecture of Windows 10.
Mark began his descent into the rabbit hole. He navigated through forums archived in 2015, where users spoke in the cryptic tongue of "COM ports" and "Device Manager yellow triangles." He downloaded "Huawei_Driver_v5.0," only for the installer to hang at 99%, mocking him.
He tried the "MobileBroadband" manual update. He tried disabling driver signature enforcement, a move that felt like performing open-heart surgery on his operating system. Each time he restarted, the little green light on the E5573 would blink—once, twice—and then fade into a steady, accusing red.
The clock struck 3:30 AM. Panic was no longer a feeling; it was a physical weight. He found a stray post on page eight of a search result, a comment from a user named TechNomad92 . It wasn't a link to a driver, but a set of instructions:
"Windows 10 hates the auto-run. Force the 'Remote NDIS based Internet Sharing Device' through the Network Adapters menu. Don't let it search; tell it what it is." With trembling fingers, Mark followed the path.
Update Driver > Browse my computer > Let me pick from a list.
He scrolled past the generic options until he found it. He clicked "Next."
The computer paused. The fan whirred into a high-pitched scream. And then, a sound sweeter than any symphony: the of a successful connection.
The red light on the Huawei E5573 turned a brilliant, steady blue. The "No Internet" icon in the corner of his screen transformed into the bars of a cellular signal. Mark didn't waste a second. He hit "Upload," watching the progress bar crawl across the screen as the sun began to peek through the gray clouds.
When the "Submission Successful" message finally appeared, Mark leaned back, his eyes burning but his heart light. He looked at the little Huawei puck. It was outdated, finicky, and a nightmare to install—but tonight, it was the hero of the story. actual step-by-step technical guide
to installing those drivers on Windows 10, or are you looking for a specific version of the firmware?
To install drivers for the Huawei E5573 Mobile Wi-Fi on Windows 10, you can use the built-in virtual drive or download the official management software. Method 1: Built-in Virtual CD (Plug-and-Play)
Most Huawei E5573 models contain the necessary drivers on a virtual drive that appears when you connect it via USB.
Connect the device: Use a high-quality USB cable to connect the E5573 to your Windows 10 laptop.
Open File Explorer: A virtual CD drive (often labeled "Mobile Broadband" or "Huawei") should appear in "This PC."
Run Setup: Open the drive and double-click AutoRun.exe or Setup.exe.
Follow Prompts: Complete the installation wizard to install both the drivers and the management dashboard. Method 2: Official Huawei Support Software
If the virtual drive does not appear, Huawei recommends using their official management tool to find and update drivers.
HUAWEI PC Manager: Download this tool from the HUAWEI Support Global page to automatically detect and install official drivers for connected Huawei hardware.
DriverTools: This is another official utility available on the Huawei Support site for manual model selection and driver downloading. Method 3: Manual Installation (If Not Recognized)
If Windows 10 fails to see the device at all, you may need to force a driver update: Right-click the Start button and select Device Manager.
Look for "Other devices" or "Ports (COM & LPT)" with a yellow exclamation mark. Right-click the entry and select Update driver.
Choose "Search automatically for updated driver software" or point it to the folder where you extracted downloaded drivers from the sources above. Web Management Interface Downloading Drivers | HUAWEI Support Global
Huawei E5573 drivers for Windows 10" sounds like a technical troubleshooting query, viewing it through the lens of a formal essay allows us to explore the intersection of aging hardware and modern operating systems.
The Bridge Between Generations: Integrating the Huawei E5573 with Windows 10 Huawei E5573
, a classic mobile Wi-Fi hotspot, represents a pivotal era in portable connectivity. However, as the digital landscape shifted toward Windows 10, a significant "driver gap" emerged, illustrating the ongoing challenge of hardware-software longevity. The Evolution of ConnectivityIn its prime, the
was celebrated for its plug-and-play simplicity. It served as a vital link for remote workers and travelers, converting 4G signals into personal Wi-Fi bubbles. Yet, the transition to Windows 10 introduced stricter driver signature requirements and updated USB stack protocols. This evolution often left the device "unrecognized" by the OS, necessitating manual driver intervention to restore the bridge between the physical modem and the digital interface.
The Technical Necessity of DriversDrivers act as the translator between a device's firmware and the computer's kernel. For the
on Windows 10, the "Huawei Mobile Connect" driver suite is essential. Without these specific instructions, the operating system cannot properly initialize the COM ports required for secondary functions like dashboard management or firmware updates. The quest for these drivers is more than a technical hurdle; it is a maintenance ritual that extends the lifecycle of perfectly functional hardware, pushing back against the culture of planned obsolescence.
Conclusion: Sustainability in the Digital AgeThe persistence of users seeking Huawei E5573
drivers in 2026 highlights a commitment to utility over novelty. By successfully bridging the gap between a decade-old hotspot and a modern operating system, we prove that software compatibility—not just hardware power—is the true currency of the digital age. Ensuring these "translations" remain available is key to a more sustainable and connected future.
Setting up the Huawei E5573 (a popular pocket Wi-Fi modem) on Windows 10 is usually straightforward because it is designed to be "Plug and Play." However, if your computer isn't recognizing the device when connected via USB, you may need to manually trigger the driver installation. 1. Built-in Auto-Installation (Preferred)
Most Huawei modems come with the drivers stored on the device itself. When you connect it to your PC, Windows should see it as a virtual CD drive. to your Windows 10 computer using a high-quality USB cable. File Explorer Further Resources:
(Windows Key + E) and look for a new drive named something like "Mobile Broadband" or "Huawei." Open that drive and look for a file named AutoRun.exe Right-click the file and select Run as Administrator
. Follow the prompts to install the Huawei Mobile Broadband software and drivers. 2. Manual Driver Installation
If the auto-installation doesn't start or the drive doesn't appear, you can try these methods: Using Windows Update: Windows 10 can often find the drivers automatically. Go to Settings > Update & Security > Windows Update Check for updates
. Check the "Optional updates" section if the modem still isn't working. Huawei PC Manager: If you are using a Huawei laptop, the HUAWEI PC Manager can automatically detect and update all related drivers. Official Driver Tools: You can download the DriverTools
package (v1.2.0.5 is compatible with Windows 10/11) from the Official Huawei Support Site 3. Troubleshooting "USB Not Recognized" If the device still isn't showing up in Device Manager: Check Device Manager: Right-click the Start button and select Device Manager
. Look for "Other devices" or "Modems" with a yellow exclamation mark. Scan for Changes: Action > Scan for hardware changes to force Windows to look for the connected device. Try Another Port:
Ensure you are using a direct USB port on your motherboard rather than a USB hub, which can sometimes lack the power to run the modem properly. HUAWEI Global 4. Using the Web Interface (No Drivers Needed)
If you only need to change settings (like your Wi-Fi password), you don't actually need drivers. You can manage the device wirelessly: Connect your PC to the Open a browser and type 192.168.8.1 into the address bar. Log in (default credentials are usually unless changed) to manage your connection.
Are you having trouble with the USB connection specifically, or are you trying to update the device's firmware for better performance? Downloading Drivers | HUAWEI Support Global
Huawei E5573 Go to product viewer dialog for this item. is a highly portable 4G LTE mobile Wi-Fi hotspot, popular for its compact design and reliable connectivity. However, users often face driver-related issues when connecting it via USB to Windows 10, as the operating system may fail to recognize the device automatically. Core Functionality of Drivers Drivers for the Huawei E5573
act as the essential bridge between the device's firmware and the Windows 10 environment. Without them, your computer cannot communicate with the modem for: USB Tethering: Using the as a wired modem for faster, more stable internet.
Web Dashboard Access: Managing settings via the local IP address (e.g., 192.168.8.1).
Firmware Updates: Applying critical security and performance patches. Types of Required Drivers
For full functionality on Windows 10, the following driver components are typically needed:
USB Composite Device Driver: Basic recognition of the hardware when plugged in.
Huawei Mobile Connect - Network Card: Enables the system to treat the device as a network adapter.
Huawei Mobile Connect - Modem: Allows legacy dial-up or specialized connection software to interface with the device.
PC UI Interface: Necessary for sending commands to the device and performing firmware updates. How to Install Drivers on Windows 10
Windows 10 generally attempts to install these automatically, but manual intervention is often required. 1. Using the Virtual CD-ROM When first plugged in, the often appears as a Virtual CD-ROM drive in "This PC." Open the drive and run AutoRun.exe or Setup.exe.
This installs the Mobile Broadband HL Service, which includes the necessary drivers. 2. Using Huawei PC Manager
For official support, Huawei PC Manager can automatically detect and update non-built-in drivers for Huawei devices connected to your system. 3. Manual Update via Device Manager
If the device shows up as "Unknown Device" or with a yellow exclamation mark: Right-click Start and select Device Manager.
Find the device under "Ports (COM & LPT)" or "Other devices."
Right-click it, select Update driver, and choose Search automatically for updated driver software. Updating Device Software
Beyond PC drivers, keeping the device's internal software updated is critical. You can perform an update directly through the modem's web interface: Connect to the via Wi-Fi or USB.
Navigate to the IP address listed on the sticker under the battery (usually 192.168.8.1).
Go to More Functions > Manage Updates > Update Now to ensure you are running the latest version. Troubleshooting Common Issues
Device Not Detected: Ensure you are using the original USB cable. Some "charging-only" cables do not support data transfer.
Incompatible Drivers: If old drivers cause conflicts, you can uninstall them by right-clicking the device in Device Manager and selecting Uninstall device.
Windows 10 "Driver Signature" Error: In some cases, Windows 10 may block older Huawei drivers because they aren't digitally signed for the latest OS build. You may need to temporarily disable "Driver Signature Enforcement" to complete the installation. Driver List-HUAWEI Official Site
A: Check your APN settings. Go to 192.168.8.1 → Settings → Dial-up → Profile Management. Ensure the correct APN (e.g., internet, fast.t-mobile.com, etc.) is entered and selected.
Despite the simple process, users encounter several recurring issues.