If you are using a USB programming cable, plug it into your PC. If it isn't recognized automatically, you may need to download the Prolific or FTDI driver associated with your cable chip. This is the most common stumbling block for new users.
For each channel, fill in:
| Field | Example Value | Note | |-------|---------------|------| | Channel Name | "BASE 1" | Max 6-8 characters | | Receive Frequency | 464.50000 | Must match your repeater | | Transmit Frequency | 469.50000 | +5 MHz offset for UHF | | QT/DQT Encode | 100.0 Hz (CTCSS) | Use drop-down menu | | QT/DQT Decode | 100.0 Hz | Same as encode for standard use | | Bandwidth | 12.5K | Narrowband (FCC compliant) | | Tx Power | High | For mobile units |
Pro tip: In the new software, you can copy/paste rows (right-click menu) to speed up repetitive programming.
Before you start, ensure you have the correct hardware. The software is useless without a way to connect the radio to your computer.
A: No. Hytera discontinued the TC580 series in 2015. The "new" software has been updated by third-party radio technicians. However, it is the standard used by most commercial radio dealers today.
This is the most critical section. Caution: The internet is filled with malware disguised as "HYT TC580 programming software new."
Do not download random .exe files from untrusted forums.
The original HYT TC580 programming software was designed in the early-to-mid 2000s for Windows XP and Windows 7. If you try to run that original disc or download on a modern 64-bit Windows 11 machine, you will likely encounter:
The "new" iterations of the HYT TC580 software (often referred to as version 1.20 or higher) have been modified or repackaged to overcome these hurdles. The "new" software typically offers:
Note: HYT (now part of Hytera) no longer officially supports the TC580, so "new" software is typically community-updated or sourced from third-party radio vendors who have patched the original executables.
Warning: Always scan any downloaded programming software with antivirus software. Because these programs interact with hardware drivers, they are sometimes falsely flagged as "riskware." Use trusted sources only (e.g., authorised radio dealer forums or reputable tech repositories like radioreference.com).
Create or edit channels in CPS using the grid editor. Use copy/paste to replicate patterns (e.g., many channels sharing same PL).
If you are using a USB programming cable, plug it into your PC. If it isn't recognized automatically, you may need to download the Prolific or FTDI driver associated with your cable chip. This is the most common stumbling block for new users.
For each channel, fill in:
| Field | Example Value | Note | |-------|---------------|------| | Channel Name | "BASE 1" | Max 6-8 characters | | Receive Frequency | 464.50000 | Must match your repeater | | Transmit Frequency | 469.50000 | +5 MHz offset for UHF | | QT/DQT Encode | 100.0 Hz (CTCSS) | Use drop-down menu | | QT/DQT Decode | 100.0 Hz | Same as encode for standard use | | Bandwidth | 12.5K | Narrowband (FCC compliant) | | Tx Power | High | For mobile units |
Pro tip: In the new software, you can copy/paste rows (right-click menu) to speed up repetitive programming. hyt tc580 programming software new
Before you start, ensure you have the correct hardware. The software is useless without a way to connect the radio to your computer.
A: No. Hytera discontinued the TC580 series in 2015. The "new" software has been updated by third-party radio technicians. However, it is the standard used by most commercial radio dealers today.
This is the most critical section. Caution: The internet is filled with malware disguised as "HYT TC580 programming software new." If you are using a USB programming cable,
Do not download random .exe files from untrusted forums.
The original HYT TC580 programming software was designed in the early-to-mid 2000s for Windows XP and Windows 7. If you try to run that original disc or download on a modern 64-bit Windows 11 machine, you will likely encounter:
The "new" iterations of the HYT TC580 software (often referred to as version 1.20 or higher) have been modified or repackaged to overcome these hurdles. The "new" software typically offers: The "new" iterations of the HYT TC580 software
Note: HYT (now part of Hytera) no longer officially supports the TC580, so "new" software is typically community-updated or sourced from third-party radio vendors who have patched the original executables.
Warning: Always scan any downloaded programming software with antivirus software. Because these programs interact with hardware drivers, they are sometimes falsely flagged as "riskware." Use trusted sources only (e.g., authorised radio dealer forums or reputable tech repositories like radioreference.com).
Create or edit channels in CPS using the grid editor. Use copy/paste to replicate patterns (e.g., many channels sharing same PL).
