Infineon Memtool 4.9 (2024)

Infineon Memtool 4.9 is a free-of-charge, Windows-based software utility designed for on-chip flash memory programming of Infineon microcontrollers. It is a standard tool for developers working with the AURIX™, TriCore™, and XMC™ families, providing essential functions to erase, program, verify, and protect memory. Key Features and Capabilities

The tool is designed for evaluation and development environments, offering ready-to-use configuration files for Infineon evaluation boards.

Flash Operations: Erase, program, verify, and read-back for both program and data flash areas.

Security & Protection: Setting and resetting flash protection (on-chip only) and handling UCB (User Configuration Blocks) for AURIX™ devices.

File Support: Direct loading of Intel-Hex and Motorola S-Record files into the target device.

Automation: Supports a limited set of batch commands (e.g., connect, open_file, program) to automate repetitive flashing tasks via .bat files. Supported Microcontroller Families

Memtool 4.9 supports a vast range of Infineon families, including:

AURIX™ & TriCore™: TC2xx, TC3xx, and preliminary support for TC49x.

XMC™ Series: XMC1000 and XMC4000 series (including XMC4800, XMC4700, and XMC1400). Legacy Families: XC800, XC16x, and XC2000. Communication Interfaces

To connect a PC to the target hardware, Memtool utilizes several standard interfaces: Infineon Memtool infineon memtool 4.9

Infineon MemTool 4.9 is a free, Windows-based software tool used for on-chip flash programming

. It is specifically designed to handle FLASH and OTP (One-Time Programmable) memory devices across various Infineon microcontroller families. Key Features Core Functions

: Erase, program, verify, and protect selectable flash sections or the entire memory area. Programming Method : Supports opening Intel-Hex files

and writing their contents (fully or partially) to target devices. Pre-Configured Files

: Provides ready-to-use configuration files for the full range of Infineon evaluation boards and application kits. Batch Command Support : Allows for basic automation via batch commands (e.g., connect, open_file, select_all_sections, program). Supported Hardware & Connections Microcontroller Families : AURIX™/TriCore™, XMC1000, XMC4000. : XC800, XC16x, XC2000. Connectivity (UART) ports. JTAG and DAP communication via the Infineon Devices Access Server (DAS) Hardware Adapters : Onboard wigglers for evaluation kits or the external miniWiggler for custom boards. System Requirements Operating System : Microsoft Windows 10 (64-bit) or newer. Permissions : Administrator privileges are required for installation. Software Bundles : Version 4.9 typically includes Infineon DAS V7.3.7 to handle target communications. Usage Limitations : Officially intended for evaluation purposes only, rather than mass production. Availability : While free from the Infineon Software Tools

portal, it has limited script access compared to premium tools from partners like PLS. If you'd like, I can help you with: Troubleshooting connection errors (e.g., "Can't connect to target") Writing a specific batch script for your hex file Finding the latest version for a specific microcontroller series Infineon Memtool

Introduction

Infineon MemTool 4.9 is a software tool used for flash programming and debugging of Infineon microcontrollers. It is designed to work with a variety of Infineon devices, including 8-bit and 32-bit microcontrollers. MemTool 4.9 provides a user-friendly interface for reading and writing memory, as well as for configuring and controlling the device.

System Requirements

Before installing MemTool 4.9, ensure that your system meets the following requirements:

Installation

To install MemTool 4.9, follow these steps:

Getting Started

To start using MemTool 4.9, follow these steps:

User Interface

The MemTool 4.9 user interface consists of several sections:

Basic Operations

Here are some basic operations that can be performed with MemTool 4.9: Infineon Memtool 4

Advanced Operations

MemTool 4.9 also provides advanced operations, such as:

Tips and Tricks

Here are some tips and tricks to help you get the most out of MemTool 4.9:

Troubleshooting

If you encounter problems while using MemTool 4.9, try the following:

MEMTool 4.9 is Infineon’s Windows application for programming and managing serial EEPROM/FRAM devices and some Infineon microcontrollers via supported adapters (e.g., XMC-SW, AURIX tools, or third-party programmers). Version 4.9 focuses on stability, expanded device support, updated GUI elements, and enhanced script/automation features.

| Feature | Memtool 4.9 | Memtool 5.x | DAVE 4.x | AURIX Flasher | |---------|------------|-------------|----------|----------------| | XC8xx support | ✅ Full | ❌ Removed | ⚠️ Limited (via plugin) | ❌ | | XC166 support | ✅ Yes | ✅ Basic | ⚠️ Legacy plugin only | ❌ | | XC2000 support | ✅ Full | ✅ Good | ✅ Partial | ❌ | | AURIX TC2xx | ❌ | ✅ | ✅ | ✅ | | GUI complexity | Minimal | Moderate | High | Minimal | | License cost | Free | Free (with login) | Free (DAVE) | Free | | Windows 11 ready | ⚠️ Legacy mode | ✅ | ✅ | ✅ |

Verdict: If your project uses XC800/166/2000, Memtool 4.9 is superior to anything newer because modern tools have deprecated BSL support for these families. Installation To install MemTool 4