Jis G 3193 Pdf -

The standard outlines limits for:

If you are outside Japan, use authorized resellers like:

JIS standards are revised every 5–10 years. The current valid version as of this writing is JIS G 3193:2019.

When downloading a jis g 3193 pdf, ensure the cover page says "JIS G 3193:2019" (or the latest year). jis g 3193 pdf

Once you have legally obtained the PDF, integrate it effectively:

Step 1: Verify the Edition Look at the first page. Confirm the standard number and publication date. For example: JIS G 3193:2019 (if that is the latest).

Step 2: Locate the Product Category Use the table of contents (usually in both Japanese and English) to find: The standard outlines limits for: If you are

Step 3: Cross-Reference Nominal Size Find your nominal size (e.g., "200 x 100"). Read the row: height, flange width, web thickness, corner radii.

Step 4: Apply Tolerances Do not just look at nominal dimensions. Scroll to the "Permissible variations" tables and apply the allowed plus/minus to your inspection criteria.

Step 5: Calculate Theoretical Mass Use the given cross-sectional area (cm²) multiplied by steel density (7.85 g/cm³) and length. The PDF provides precalculated kg/m values for common sizes—check them against your own calculation. When downloading a jis g 3193 pdf ,

For plates with a width up to 2000 mm, the permissible variation for a nominal thickness of 6 mm is typically ±0.35 mm (for specified minimum tensile strength < 400 N/mm²). Tighter tolerances apply for higher strength or wider plates.

| Nominal Thickness (mm) | Tolerance for Width < 1600 mm | Tolerance for 1600-2000 mm | |------------------------|-------------------------------|-----------------------------| | 1.5 to 3.0 | ±0.20 mm | ±0.22 mm | | Over 3.0 to 6.0 | ±0.22 mm | ±0.35 mm | | Over 6.0 to 10.0 | ±0.35 mm | ±0.50 mm | | Over 10.0 to 16.0 | ±0.50 mm | ±0.70 mm | | Over 16.0 to 25.0 | ±0.70 mm | ±1.00 mm |

Note: These are illustrative values. Always refer to the official JIS G 3193 PDF for exact tables by strength grade (Class A, B, C).

The official source is the JSA (https://webdesk.jsa.or.jp). You can purchase a single-user PDF for approximately ¥4,000–¥8,000 JPY (around $30–$60 USD). This is the only fully legal, authoritative, and up-to-date version.