Mcs Drivers Disk 245132157 Page

This number is almost certainly a model number, part number, or OEM identifier printed on the driver diskette’s label. During the Windows 9x/2000 era, manufacturers printed lengthy numeric codes to help support technicians identify the correct drivers without opening the computer case.

The format 245132157 does not match standard PCI Vendor/Device IDs but does appear in several archived driver repos as a LINTEC or MCS-IDE controller driver package.

Key takeaway: There is no single official "MCS" company still supporting this number. The disk likely contains .INF, .SYS, and .VXD files for a mass storage controller.

A. Identify the hardware first (don't rely only on the disk label): mcs drivers disk 245132157

B. Search smarter:

C. If you need the driver today:

Based on driver content recovered from legacy FTP servers, this disk supports: This number is almost certainly a model number,

| Operating System | Driver Type | Expected Stability | |-----------------|-------------|--------------------| | Windows 95 OSR2 | .VXD real-mode | Good | | Windows 98/SE | Protected-mode .SYS | Excellent | | Windows Me | WDM-compatible | Fair | | Windows NT 4.0 | .SYS (SCSI miniport) | Good | | Windows 2000 | WDM/SCSIport | Moderate | | Windows XP (32-bit) | Legacy .SYS | Poor (needs manual force) | | MS-DOS 6.22 | ASPI manager | Good |

Note: There is no 64-bit driver for any MCS disk from this era.

Before you attempt to install drivers, you must identify the actual card or onboard chipset. Here is how: Before you attempt to install drivers

Cause: Windows cannot initialize the MCS controller before the boot drive. Fix: During Windows 2000/XP installation, press F6 to load the MCS driver from floppy at the very beginning of setup.

Assuming you have obtained the driver files (either via disk image or extracted ZIP), here is how to install on Windows 98/ME (the most common target):