Mlx90614 Proteus Library Access

Now you can simulate MLX90614 in Proteus successfully.

MLX90614 Infrared Thermometer Library for Proteus

The MLX90614 is a non-contact infrared thermometer that can measure temperature in a wide range of applications. In this write-up, we will explore how to use the MLX90614 library in Proteus, a popular simulation software for electronic circuits.

Introduction

The MLX90614 is a high-accuracy infrared thermometer that uses advanced thermopile technology to measure temperature. It has a wide temperature measurement range of -40°C to 125°C and an accuracy of ±0.5°C. The device communicates with microcontrollers using the I2C protocol. mlx90614 proteus library

Proteus Library

To use the MLX90614 in Proteus, you need to download and install the MLX90614 library. The library provides a virtual model of the device that can be used in your Proteus simulations.

Step-by-Step Installation

Adding the MLX90614 to Your Proteus Schematic Now you can simulate MLX90614 in Proteus successfully

Configuring the MLX90614

Simulation and Testing

Example Code

Here is an example code snippet in C that demonstrates how to read temperature data from the MLX90614 using the I2C protocol: Adding the MLX90614 to Your Proteus Schematic

#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#define MLX90614_I2C_ADDRESS 0x5A
void mlx90614_init() 
  // Initialize I2C communication
  TWBR = 0x18; // 100 kHz
  TWSR = 0x00;
uint16_t mlx90614_read_temperature()  (1 << TWSTA);
  while (!(TWISr & (1 << TWINT)));
  TWIDR = MLX90614_I2C_ADDRESS << 1;
  while (!(TWISr & (1 << TWINT)));
  TWIDR = 0x00; // Register address
  while (!(TWISr & (1 << TWINT)));
  TWICR = (1 << TWEN)
int main() 
  mlx90614_init();
  while (1) 
    uint16_t temperature = mlx90614_read_temperature();
    // Process temperature data
return 0;

This code snippet demonstrates how to initialize the I2C communication, send a read command to the MLX90614, and read temperature data from the device.

Conclusion

The MLX90614 library for Proteus provides a convenient way to simulate and test the MLX90614 infrared thermometer in your electronic circuits. By following the steps outlined in this write-up, you can easily add the MLX90614 to your Proteus schematic and start simulating and testing your projects.

Versioning and dependencies.

Warning: There is no official MLX90614 library distributed by Labcenter Electronics (Proteus developers). You will find files labeled MLX90614.IDX, MLX90614.LIB, and MLX90614.HEX on various engineering forums (Edaboard, TheEngineeringProjects, GitHub).