Nako Na-613d Disable Alarm 〈TRUSTED〉
If you have disabled the button-press sounds using the method above, but the device is still making a loud mechanical buzzing or humming noise, this may not be the alarm setting—it could be a wiring issue.
The NA-613D is designed to switch AC voltage. If you are switching a high-load appliance (like a geyser or large motor) or if the wiring is loose, the internal relay can vibrate.
If you’ve tried all methods and still hear beeping, consider these issues:
| Problem | Solution |
|---------|----------|
| Wrong password | Default password is usually 123456 or 0000. Try admin123 or 123456 in SMS commands. |
| SIM card issues | Ensure SIM has SMS credits and is not blocked. |
| Tracker in sleep mode | Wake it up by moving the vehicle or calling the device number. |
| Firmware glitch | Perform a factory reset via SMS: admin123 reset. |
| Buzzer stuck | The buzzer may be mechanically stuck; a light tap can fix it. |
Unlike a standard "snooze" button, permanently disabling the alarm on the NA-613D requires checking two separate alarm modes (Alarm 1 and Alarm 2).
1. Identify the alarm buttons.
Look on the top or front of the unit for two buttons labeled AL 1 (Alarm 1) and AL 2 (Alarm 2).
2. Stop a currently ringing alarm.
If the alarm is sounding right now, press POWER / AL OFF (often a single combined button). Do not press SNOOZE (usually labeled SNZ), as that will only delay it by 9 minutes.
3. Permanently disable Alarm 1 or Alarm 2.
4. Confirm deactivation.
Look at the LCD display. All alarm indicator icons should be gone. Only the current time should remain visible.
To disable the alarm on a Nako NA-613D digital clock, you generally need to use a specific button combination from the normal time-display mode. While this device is commonly marketed under the Nako brand, it shares the same internal module as the Kenko KK-613D and follows the same operating procedures. How to Disable the Alarm
To toggle the alarm on or off, follow these steps while the clock is in its Normal State (showing the current time): Locate the Buttons : The device typically has three main buttons labeled (Date/Adjust), and Toggle the Alarm : Press and hold the button, then simultaneously press the Check the Display : Look for the alarm symbol (often a bell icon) on the LCD. If the symbol is , the alarm is active. If the symbol is , the alarm is disabled. Made-in-China.com Stopping a Sounding Alarm If the alarm is currently ringing and you want to stop it: Stop Completely
: Press any button except for the specific Snooze function (if applicable to your specific variant).
: Some models may enter snooze mode if a specific button is pressed, causing it to ring again in 5 minutes. Reference for Other Modes Nako NA-613D Go to product viewer dialog for this item. button to cycle through its various functions: Press M once : Stopwatch mode. Press M twice : Alarm time setting mode. Press M three times
: Real-time adjustment mode (to set the current time and date). Made-in-China.com
For a visual guide on these settings, you can refer to instructional videos from sources like
To disable the alarm and hourly chime on the Nako NA-613D digital clock, you generally use button combinations from the home (time) screen. The clock typically features three buttons labeled S (Split/Lap), D (Start), and M (Mode). Disabling the Daily Alarm
To toggle the daily alarm on or off, perform the following in normal time mode: Action: Press and hold S, then press D once.
Indicator: Look for a bell icon or "ALM" indicator on the display. When the alarm is disabled, this icon will disappear. Disabling the Hourly Chime
If your clock beeps at the top of every hour, you can disable this signal using a similar combination: Action: Press and hold S, then press M once.
Indicator: In many versions of this model, if the days of the week (MON, TUE, etc.) are all visible at once while holding S, the chime is on. If the day flags disappear, the chime is disabled. Quick Reference for Buttons Standard Function M (Mode)
Cycles through modes (Time → Stopwatch → Alarm Set → Time Set). S (Split/Lap) Shows alarm time; used with others to toggle functions. D (Start) Shows date; used to advance numbers during setup.
If the buttons on your specific unit are not labeled, the S button is usually the lower-left or top-right (Lap), D is often the top-right or lower-right (Start), and M is the bottom-left.
Are you also looking for instructions on how to reset the time or use the stopwatch feature on this device?
The Nako NA-613D (also sold under brands like Kenko) is a simple, budget-friendly digital quartz clock commonly used in vehicles or as a small desk clock. Disabling the alarm can be tricky because the buttons often lack clear labeling for this specific function. How to Disable the Alarm
To stop the daily alarm or the hourly chime from going off, follow these steps:
Enter Alarm Mode: Press the MODE button (usually the bottom-left button) until you see the alarm time displayed instead of the current time.
Toggle Alarm/Chime: Once in alarm mode, press the START/RESET button (usually the top-right button) to cycle through the alarm settings.
Identify the Icons: Watch the top of the LCD screen for small icons: Bell Icon: The daily alarm is active. Signal/Lines Icon: The hourly chime (beep) is active.
Disable All: Continue pressing the START/RESET button until no icons are visible at the top of the display.
Confirm: Press the MODE button again to return to the standard time display. Device Overview
Design: Features a monochrome LCD display and a removable stand with an adjustable tilt angle.
Common Issues: Users have reported mixed quality, with some units arriving non-functional or failing shortly after purchase.
Alternative Identification: If your device doesn't say "Nako," look for "Kenko KK-613D," as they use the same internal hardware and operation methods.
If the buttons on your specific unit are labeled differently, try holding the START and RESET buttons simultaneously while in the main time screen; on many similar digital watches and clocks, this is a "hidden" shortcut to toggle the alarm on and off.
Here are a few ways to write this, depending on where you need to use the text:
Option 1: Instruction Manual Style (Step-by-Step) How to Disable the Alarm on the Nako NA-613D nako na-613d disable alarm
Option 2: Short & Direct "To disable the alarm on the Nako NA-613D, press the Alarm button until the alarm icon disappears from the screen."
Option 3: Technical/Status Log "Device: Nako NA-613D. Action: Alarm function disabled."
To disable the alarm on a Nako NA-613D Go to product viewer dialog for this item.
digital clock, you typically use a combination of the "S" and "D" buttons while in the normal time-display mode. This compact device is widely used as a car dashboard clock or kitchen timer and is available at retailers like Meesho and Amazon India. Quick Method to Disable the Alarm
If you are in the normal mode (the screen showing the current hour, minute, second, and day of the week), follow these steps to toggle the alarm off:
Press and hold the "S" button. While holding it, the current alarm time will be displayed. Simultaneously press the "D" button.
Check the display icon. Look for a small bell or "ALM" icon on the screen. If the icon disappears, the alarm is disabled. If it reappears, it is enabled. Managing the Hourly Chime
Often, users mistakenly believe the alarm is on when they actually hear an hourly beep. To disable the hourly chime: Press and hold the "S" button. Simultaneously press the "M" button.
Observe the week indicator. Usually, if all the week icons (MON–SUN) appear or disappear, it indicates the hourly chime has been toggled. Setting or Changing the Alarm Time
If you need to adjust the alarm before turning it off, use the mode button to navigate: Enter Alarm Mode: Press the "M" (Mode) button two times.
Select Digits: Press the "S" button to toggle between flashing hour and minute digits.
Adjust Values: Press the "D" button to increase the flashing numbers to your desired time.
Save and Exit: Press the "M" button once more to return to the normal time display. Troubleshooting Common Issues
The alarm still rings: Ensure the alarm icon is completely gone from the LCD. Sometimes the "ALM" text is very small and easy to miss. Buttons aren't responding : Check the battery. The
typically uses a single button cell or AAA battery depending on the specific sub-model variant.
Screen is faint: This device is not waterproof; moisture or low battery life can cause the display to fade or the alarm to malfunction. Nako NA-613D Plastic Quartz Clock for Car (Black, Small)
The Nako NA-613D Go to product viewer dialog for this item. is a budget-friendly, compact digital quartz clock widely used in cars, kitchens, and office desks due to its adhesive mount and multi-functionality. While its interface is simple, its three-button layout often leads to confusion when trying to disable recurring alarms. 🛑 How to Disable the Alarm The most frequent issue users face with the
is an accidental daily alarm or hourly chime. Use the following button combinations while in Normal Mode (the screen showing the current time):
To Toggle Alarm On/Off: Press and hold the S (Set) button and the D (Date/Adjust) button simultaneously.
Check the Display: Look for a small bell icon or "ALM" indicator. If the icon disappears, the alarm is disabled.
To Toggle Hourly Chime: Press and hold the S (Set) button and the M (Mode) button at the same time.
Check the Display: All "Day of the Week" indicators appearing at once usually signify the hourly chime is active; they will disappear when it is off.
Silence a Ringing Alarm: Press the S button to snooze or any other button to stop it for the day. 🔍 Comprehensive Review Design & Build Quality Nako NA-613D
is built for utility over aesthetics. It features a lightweight plastic chassis with a small, high-contrast LCD screen.
Display: Uses large "digital writing" that is easy to read from a distance, though it lacks a backlight for nighttime use.
Mounting: Comes with a double-sided adhesive pad, making it a popular aftermarket car accessory for vehicles without built-in clocks.
Durability: Reviewers on Amazon India give it mixed feedback; while the quartz movement is reliable for timekeeping, the plastic casing feels "economical" and may not survive heavy drops. Functional Performance
Despite its low price point, the device packs several features: Timekeeping: Offers 12/24-hour formats.
Stopwatch: Accessible by pressing the M button once. It supports basic start/stop/reset functions.
Calendar: Displays the date and month by pressing the D button.
Power: Operates on a single LR1130 or AG10 button cell battery. User Experience (The "Button Struggle") The interface is the
's greatest weakness. Because there are only three buttons (M, S, D), many functions require "hidden" combinations.
Setup Complexity: Entering the "Time Adjust" mode requires pressing M three times, which can lead to users accidentally triggering the alarm or stopwatch instead.
Value for Money: Most users agree it is a high-value purchase for under $5, provided you don't lose the manual. 🛠 Quick Mode Guide Button Sequence View Date Press D once View Alarm Time Press S once Stopwatch Mode Press M once Alarm Set Mode Press M twice Time Set Mode Press M three times If you are having trouble seeing the display,
Title: How to Disable Alarm on Nako NA-613D If you have disabled the button-press sounds using
Hey everyone!
Are you tired of the annoying alarm on your Nako NA-613D? Do you want to know how to disable it? Look no further! In this post, I'll guide you through the simple steps to turn off the alarm on your Nako NA-613D.
Step-by-Step Instructions:
That's it! Your alarm should now be disabled. If you're still having trouble, refer to your user manual or comment below and I'll do my best to help.
Share Your Experience: Have you had any issues with your Nako NA-613D alarm? Share your experiences and tips in the comments below!
Like and Share: If this post was helpful, be sure to like and share it with your friends and family who may be struggling with their Nako NA-613D alarm.
This report outlines the procedure to disable the alarm on the Nako NA-613D digital car clock/timer, based on standard operational procedures for this model. Nako NA-613D Alarm Management Report 1. How to Disable/Turn Off the Alarm To permanently turn off the alarm on the Nako NA-613D:
Press the "MODE" button until you are in the alarm setting mode.
While the alarm time is flashing, press the "SET" (or ADJ) button to toggle the alarm indicator (usually a bell or "AL" icon) off.
Ensure the "Alarm" icon is no longer visible on the LCD display. 2. Temporary Snooze If the alarm is ringing:
Press the "SNOOZE/LIGHT" button (top button) to temporarily silence it. The alarm will ring again in a few minutes. 3. Stop Alarm Permanently (While Ringing)
If the alarm is currently ringing, press any button other than SNOOZE to stop it completely. 4. Additional Device Functionality The Nako NA-613D features: 12/24 hour format selection.
Built-in stopwatch for measuring time, useful for car maintenance. Calendar display.
If you are still having trouble disabling the alarm, could you tell me: Are you seeing a bell icon on the display right now?
Is it the hourly chime (beep every hour) you are trying to turn off, rather than the wake-up alarm? Nako NA-613D инструкция часов
To disable the alarm on your Nako NA-613D digital clock, use the following button combinations while in the "Normal" time-display mode:
Disable Alarm: Press and hold the S button, then press the D button. The alarm icon (often a small bell or wave symbol) should disappear from the screen.
Disable Hourly Chime: Press and hold the S button, then press the M button. This toggles the hourly "beep" function. Troubleshooting If the alarm is currently ringing:
Stop the Alarm: Press any button (except SNOOZE if your model has a dedicated one) to stop the sound completely for the day.
Snooze: If your unit has a stand or a top button labeled for snooze, pressing it will temporarily silence the alarm, but it will ring again in 5 minutes. Button Map for Nako NA-613D Standard Label Primary Function M Cycles through Time, Stopwatch, and Alarm settings. S Set/Select
Used to view the current alarm time or select digits during adjustment. D Date/Adjust
Used to view the date or increase numbers when setting time/alarm.
Na-613D Quartz Clock for Kitchen Timer Car Desk Carriage Clock
Mastering the Nako NA-613D: How to Disable Your Alarm If you own a Nako NA-613D digital clock—popular as a compact dashboard or desk accessory—you might find its interface a bit puzzling. Whether the daily beep is driving you crazy or you just need a quiet weekend, disabling the alarm is a straightforward process once you know the right button combination. Quick Step: How to Disable the Alarm
In the normal time display mode, press and hold the S (LAP) and D (START) buttons simultaneously.
To Deactivate: When the alarm is active, you will see a small bell icon on the display. Pressing both buttons together will make this icon disappear, signifying the alarm is disabled.
To Activate: Pressing the same combination again will bring the bell icon back, re-enabling the daily alarm. Understanding the Buttons
The Nako NA-613D typically features three main buttons that control all its functions:
M (Mode): Cycles through different functions like the stopwatch, alarm settings, and time adjustment.
S (Lap/Set): Primarily used to view the current alarm time or select specific digits (hours/minutes) during setup.
D (Start/Date): Used to view the date or increase numerical values during settings. Managing the Hourly Chime
Does your clock beep every single hour? This is a separate function from the daily alarm.
Disable/Enable Hourly Chime: While in the normal time mode, press and hold the S (LAP) and M (MODE) buttons simultaneously.
Visual Indicator: When enabled, all seven days of the week indicators (typically at the top of the screen) will often flash or remain visible. Setting a New Alarm Time
If you want to change the alarm time rather than just turning it off: Press M (Mode) twice to enter the Alarm Setting Mode. If you’ve tried all methods and still hear
Press S (Lap) to select between the hour and minute digits (the selected value will flash).
Press D (Start) to advance the numbers to your desired time.
Press M (Mode) once more to save and return to the normal time display. Troubleshooting Common Issues
The alarm still rings: Check the display for the bell icon. If it is still visible, the alarm is active. Ensure you are pressing S and D at the exact same time.
Display is blank/faded: These clocks use a small G10/LR54 battery . If the buttons aren't responding or the sound is weak, it may be time for a replacement.
Stuck in Stopwatch: If your clock shows "00:00:00," you accidentally entered the stopwatch. Press M (Mode) once to return to the standard time.
For more details on specific setups, retailers like Amazon.in and Made-in-China often provide digital versions of the product specifications.
Na-613D Quartz Clock for Kitchen Timer Car Desk Carriage Clock
The Nako NA-613D must have your phone number pre-set as the admin. If you haven’t set one, the first authorized number to contact the tracker becomes admin by default.
Disabling the alarm on the Nako NA-613D is straightforward once you know the correct SMS commands or app settings. For most users, sending 123456 alarm off via SMS will instantly silence excessive beeping while retaining GPS functionality. If that fails, escalate to the configuration tool or hardware modification—but always weigh the security trade-off.
Remember: A silenced alarm should not mean a disabled tracker. Keep critical alerts like SOS and low battery active in SMS form for safety.
Have questions about your Nako NA-613D? Leave a comment below or consult your device manual. Always test alarms in a safe environment before relying on them for security.
Nako NA-613D Disable Alarm: A Comprehensive Guide
The Nako NA-613D is a popular alarm system used in various applications, including residential and commercial settings. While the alarm system is designed to provide security and peace of mind, there may be situations where you need to disable it. In this article, we will explore the process of disabling the Nako NA-613D alarm system and provide a comprehensive guide on how to do it.
Understanding the Nako NA-613D Alarm System
The Nako NA-613D is a wired alarm system that features a range of sensors and detectors to monitor and protect a premises. The system is designed to detect potential threats, such as intrusions, fires, and other emergencies, and alert occupants and authorities accordingly. The alarm system consists of a control panel, sensors, sirens, and other components that work together to provide a comprehensive security solution.
Why Disable the Nako NA-613D Alarm System?
There may be several reasons why you need to disable the Nako NA-613D alarm system. Some common scenarios include:
How to Disable the Nako NA-613D Alarm System
Disabling the Nako NA-613D alarm system requires a basic understanding of the system's components and configuration. Here are the steps to disable the alarm system:
Nako NA-613D Disable Alarm Code
The Nako NA-613D alarm system uses a specific code to disable the alarm. The default disable code is:
[*] + 613D + [#]
Enter this code into the control panel to disable the alarm system.
Additional Tips and Precautions
When disabling the Nako NA-613D alarm system, keep the following tips and precautions in mind:
Re-Enabling the Nako NA-613D Alarm System
When you're ready to re-enable the alarm system, follow these steps:
Conclusion
Disabling the Nako NA-613D alarm system requires a basic understanding of the system's components and configuration. By following the steps outlined in this article, you can safely and effectively disable the alarm system. Remember to exercise caution and follow additional tips and precautions to ensure a smooth and secure process.
FAQs
Q: What is the default master code for the Nako NA-613D alarm system? A: The default master code is usually provided by the manufacturer. It's recommended to change it to a custom code for security reasons.
Q: How do I reset the Nako NA-613D alarm system? A: To reset the alarm system, enter the master code and press the "Reset" button on the control panel.
Q: Can I disable the Nako NA-613D alarm system remotely? A: It depends on the system's configuration and features. Some Nako NA-613D systems may support remote access and control, while others may not.
Q: What should I do if I forget the master code? A: If you forget the master code, contact the manufacturer or a professional for assistance. They can help you reset the code or provide guidance on how to recover it.
