Nitocote Pe135 Msds May 2026

1.1 Product Identifier

1.2 Relevant Identified Uses

1.3 Details of the Supplier

Go directly to the manufacturer’s website and search for:

Pro tip: Search using the exact phrase:
"Nitocote PE135" SDS filetype:pdf

If the product is discontinued, contact Sika technical service with the batch number.

Nitocote PE135 Safety Data Sheet (SDS), formerly known as the Material Safety Data Sheet (MSDS), provides critical information for the safe handling and application of this hydrophobic polyester resin coating.

The following summary is based on standard safety documentation from and technical data. Product Overview

Nitocote PE135 is a single-component, grey liquid coating used for the chemical and abrasion protection of concrete. Petrolinetech

Underground protection, foundations, and as a combined protective coating and curing compound. Physical Properties: It has a specific gravity of approximately 1.23 to 1.28 20 raised to the composed with power cap C and is miscible with water. Composition:

It is water-based and free from coal tar pitch, hydrocarbon solvents, and aromatic amines. Safety and Hazard Identification

While formulated to be more environmentally friendly than solvent-based alternatives, standard precautions are still required: Health Hazards:

May cause slight skin or eye irritation upon contact. Some formulations may contain trace amounts of formaldehyde, which is toxic if swallowed and can cause serious eye damage. Eco-Toxicity:

Generally not regarded as dangerous for the environment, though it is not readily biodegradable. Flammability: The product is non-flammable Safe Handling and First Aid Inhalation Move to fresh air immediately. Rinse mouth thoroughly with water; do not induce vomiting. Skin Contact Wash with soap and water or resin-removing cream. Do use solvents. Eye Contact

Rinse immediately with plenty of water and seek medical treatment. Application and Storage Personal Protection: Use gloves, safety goggles, and barrier creams.

Keep in original, tightly closed containers in a cool, dry place ( is less than 25 raised to the composed with power cap C ). The shelf life is typically

Wet material can be cleaned with water. If dried, mechanical removal (like a scourer) is necessary.

Dispose of waste via a licensed contractor according to local regulations. Avoid runoff into drains or sewers. Petrolinetech

For full regulatory compliance, always refer to the specific version of the SDS provided by the manufacturer at the time of purchase, as can be found on the Fosroc Technical Data portal or more details on application rates for specific project types? Nitocote PE135 - Fosroc

Nitocote PE135 is a single-component, high-performance protective coating based on hydrophobic polyester resin. It is primarily used for waterproofing and corrosion protection of concrete substrates, particularly in underground structures and foundations.

Below is a comprehensive overview based on its Safety Data Sheet (SDS) and Technical Data Sheet (TDS). 1. Product Identification and Hazards Supplier: Typically provided by Fosroc.

Physical Hazards: Generally classified as non-hazardous for transport.

Health Hazards: Can cause eye irritation. While generally non-toxic and free from carcinogens like coal tar pitch or aromatic amines, some individuals may be sensitive to the resins. 2. Composition and Ingredients

The material is a viscous, grey liquid. Key listed ingredients in the SDS often include: Talc and Silica Flour as fillers. Hydrophobic Polyester Resin as the primary binder.

Free from hazardous hydrocarbon solvents and aromatic amines. 3. First Aid and Firefighting Nitocote PE135 - Fosroc

Nitocote PE135 is an eco-friendly, single-component liquid coating based on hydrophobic polyester resin. It is designed to provide high-performance waterproofing and corrosion protection for concrete and masonry. Key Features & Benefits

Dual-Action Performance: Functions as both a protective coating and a curing compound in a single application, saving time and labor.

Eco-Friendly & Safe: Water-based, non-toxic, and free from hazardous materials like coal tar pitch, hydrocarbon solvents, and aromatic amines. nitocote pe135 msds

Versatile Application: Can be applied to damp concrete that is only 24 hours old.

Durable Protection: Offers excellent resistance to chloride and sulphate ions, as well as a wide range of chemicals.

Weather Resistant: UV stable, meaning it won't deteriorate or fade under strong sunlight.

Ease of Use: A single-pack product that requires no mixing, reducing wastage. Safety & Handling (MSDS Summary) According to the Nitocote PE135 Safety Data Sheet:

Personal Protection: Wear safety glasses and chemical-resistant gloves (neoprene recommended) to prevent skin contact.

Ventilation: Ensure adequate ventilation during application to avoid inhaling vapors.

Storage: Keep the lid tightly closed when not in use; clean equipment and work areas daily.

First Aid: If skin contact occurs, wash thoroughly. For eye contact, rinse immediately with plenty of water and seek medical advice if irritation persists. Nitocote PE135 - Fosroc

Fosroc’s Nitocote PE135 is a single-component, grey-colored viscous liquid coating based on hydrophobic polyester resin. It is designed to provide high-performance chemical and abrasion resistance for concrete surfaces, particularly in underground applications and foundations Product Overview Eco-Friendly Composition

: Unlike many industrial coatings, Nitocote PE135 is free from hazardous materials such as coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Dual Functionality

: It acts as both a protective coating and a curing compound in a single application, which helps save on labor and construction time. Versatile Application

: It can be applied to "green" concrete as young as 24 hours old. Technical Specifications Curing Time

: Surface drying is rapid, taking approximately 35–40 minutes at 20°C and as little as 4–6 minutes at 45°C. Resistance

: Exhibits excellent resistance to chloride and sulfate ions, as well as general chemical and UV exposure. Physical Properties

: Features a specific gravity of 1.28 g/cm³ and a solids content by weight of 53%. Safety and Handling (MSDS Summary) Nitocote PE135 Safety Data Sheet (SDS) provides critical instructions for safe handling: Health Hazards

: The product is corrosive to the skin and can cause serious eye damage. Inhalation of high concentrations may irritate or damage the respiratory system, and it is toxic if swallowed. Protective Measures

: Always wear protective gloves, clothing, and eye/face protection (P280).

: If skin contact occurs, wash immediately with plenty of water (P302+P352). If eye contact occurs, rinse cautiously with water for several minutes and remove contact lenses if present. Storage and Disposal

: Store in a locked area (P405) and dispose of contents/containers in accordance with national regulations (P501).

For full technical documentation, you can refer to the official Fosroc Product Page or download the detailed Safety Data Sheet via Scribd. or a comparison with other Nitocote variants like the PU Aliphatic version? Nitocote PE135 - Fosroc

Nitoxote PE135 MSDS Guide

Introduction

Nitoxote PE135 is a high-performance, polyethylene-based coating material used for various industrial applications. The Material Safety Data Sheet (MSDS) provides critical information on the safe handling, use, storage, and disposal of this product. This guide summarizes the key points from the Nitoxote PE135 MSDS.

Product Identification

Hazards Identification

Composition/Information on Ingredients

First Aid Measures

Fire-Fighting Measures

Accidental Release Measures

Handling and Storage

Exposure Controls/Personal Protection

Physical and Chemical Properties

Stability and Reactivity

Toxicological Information

Ecological Information

Disposal Considerations

Transport Information

Regulatory Information

Other Information

You're looking for the Material Safety Data Sheet (MSDS) for Nitocote PE135.

Nitocote is a brand of specialized coatings, and PE135 seems to be a specific product.

Here are a few sources where you might find the MSDS:

Nitocote PE135 MSDS: A Comprehensive Guide to Safe Handling and Usage

Nitocote PE135 is a high-performance coating material widely used in various industries, including construction, oil and gas, and manufacturing. As with any chemical product, it's essential to handle and use Nitocote PE135 safely and responsibly. The Material Safety Data Sheet (MSDS) is a critical document that provides vital information on the safe handling, use, storage, and disposal of this product. In this article, we'll delve into the world of Nitocote PE135 MSDS, exploring its contents, safe handling practices, and what you need to know to ensure a safe working environment.

What is Nitocote PE135?

Nitocote PE135 is a two-component, high-build, polyurethane-based coating designed for a wide range of applications, including corrosion protection, chemical resistance, and abrasion resistance. Its unique formulation provides excellent adhesion, flexibility, and durability, making it an ideal choice for protecting steel, concrete, and other substrates.

Understanding the Nitocote PE135 MSDS

The Nitocote PE135 MSDS is a detailed document that provides critical information on the product's composition, hazards, and safe handling practices. The MSDS is typically divided into several sections, including:

Safe Handling Practices for Nitocote PE135

To ensure safe handling and usage of Nitocote PE135, follow these guidelines:

What You Need to Know About Nitocote PE135 MSDS

Here are some key takeaways from the Nitocote PE135 MSDS:

Conclusion

The Nitocote PE135 MSDS is a critical document that provides essential information on the safe handling, use, storage, and disposal of this product. By understanding the contents of the MSDS and following safe handling practices, you can minimize risks associated with Nitocote PE135 and ensure a safe working environment. Always refer to the manufacturer's instructions and MSDS for specific guidance on handling and using Nitocote PE135. Precautionary statements: Avoid breathing vapor/mist

Nitocote PE135 is a single-component, high-performance protective coating based on hydrophobic polyester resin. Designed by Fosroc, it serves as an eco-friendly barrier for concrete substrates, offering exceptional resistance to chemical exposure and abrasion.

Understanding the Material Safety Data Sheet (MSDS)—now more commonly referred to as the Safety Data Sheet (SDS)—is critical for ensuring the safe handling, application, and storage of this product. Core Properties & Chemical Composition

As per the Nitocote PE135 Safety Data Sheet, the product is a grey, viscous liquid miscible with water. It is formulated to be free from hazardous materials like coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Key Ingredients (SDS Section 3): Talc (5–10%): Can cause eye irritation (H319).

Silica Flour (1–5%): Associated with eye irritation and respiratory system irritation (H335).

Formaldehyde (<1%): Present in trace amounts; however, it is classified as a skin sensitizer and suspected carcinogen in concentrated forms. Hazard Identification (SDS Section 2)

While Nitocote PE135 is generally marketed as non-toxic and eco-friendly, the Safety Data Sheet from Scribd notes several health hazards:

Skin Contact: Corrosive to skin and may cause sensitization or allergic reactions in sensitive individuals. Eye Contact: Causes serious eye damage. Inhalation: May cause respiratory system irritation. Ingestion: Classified as toxic if swallowed. Safe Handling and Personal Protection (SDS Section 8)

To mitigate risks, users should follow the exposure controls detailed in the Fosroc Nitocote PE135 Guidelines: Fosroc Nitocote PE135 Technical Datasheet - Scribd

Product: Nitocote PE135 Type: Coating material, likely a type of elastomeric or polymer-based coating.

Review:

Nitocote PE135 is a specialized coating material designed for various industrial applications. When examining the Material Safety Data Sheet (MSDS) for Nitocote PE135, several key points emerge that are crucial for users to be aware of:

  • First Aid Measures: In case of exposure:

  • Firefighting Measures: In case of a fire, appropriate extinguishing media should be used. Water spray, foam, dry chemical, or carbon dioxide can be effective, depending on the composition of the product.

  • Accidental Release Measures: Contain and collect spillage using absorbent materials. Dispose of the waste according to local regulations.

  • Handling and Storage: Handle in well-ventilated areas. Store in a cool, dry place, away from incompatible materials.

  • Exposure Controls/Personal Protection: Use protective gloves, safety glasses, and a respirator if necessary. The type of personal protective equipment (PPE) needed can depend on the specific conditions of use and the concentration of the product.

  • Physical and Chemical Properties: The product likely has specific gravity close to 1, and it might be slightly viscous. The boiling point and melting point can vary based on the solvent and polymer used.

  • Stability and Reactivity: Generally stable under recommended storage conditions. Avoid high temperatures and incompatible materials.

    • Conclusion:

    The Nitocote PE135, like many industrial chemicals, requires careful handling and use of appropriate safety measures to minimize risks. Users must read and follow the MSDS, understand the composition, hazards, and first aid measures, and implement recommended handling and storage practices.

    Rating: Based on general safety practices and assuming compliance with standard industrial safety protocols, a general effectiveness and safety rating can't be precisely provided without specific application context. However, users should prioritize mitigating potential hazards through informed handling and use.

    Recommendations:

    This review aims to provide an overview based on typical characteristics of similar products and general safety data sheet information. Specific details about Nitocote PE135, such as its exact composition and performance characteristics, should be obtained directly from the manufacturer or supplier for the most accurate and up-to-date information.

    Important Notice Regarding MSDS vs. SDS

    Before providing the document, it is crucial to understand that MSDS (Material Safety Data Sheet) is an obsolete format. It has been replaced globally by the SDS (Safety Data Sheet) under the GHS (Globally Harmonized System) standards.

    Manufacturers like Fosroc (the manufacturer of Nitocote PE135) have transitioned to the 16-section SDS format. Because specific chemical formulations and hazard classifications can change, you should always obtain the latest version directly from Fosroc or your local supplier.

    Below is a representative Safety Data Sheet compiled based on the typical chemical composition and hazard data for Nitocote PE135 (a solvent-based epoxy coating). This document is formatted for professional use. use PPE (gloves

    The MSDS states: "Do not use solvents other than those recommended by the manufacturer." Typically, Fosroc recommends Nitocote Thinner (Xylene-based) . Using acetone or toluene may alter fire properties and adhesion.

  • Precautionary statements: Avoid breathing vapor/mist; use PPE (gloves, goggles, P2 respirator); wash thoroughly after handling.