The combination of a verified Nokia TA-1235 flash file and a configured Infinity Box transforms a $10 e-waste brick into a functional smartphone. While the process requires patience and exact timing (especially entering BROM mode), it is the most reliable repair method for corrupted bootloaders and dead system UI.
Final Checklist Before Flashing:
If you encounter the dreaded "ERROR: STATUS_EXT_RAM_EXCEPTION", your hardware (eMMC) is likely dead. But in 9 out of 10 cases, the flash file and Infinity will bring your Nokia back to life.
Disclaimer: This guide is for educational and professional repair purposes. Flashing modifies your device's software and may void the warranty. Always respect copyright and intellectual property laws regarding firmware distribution.
The Nokia TA-1235 flash file for Infinity Box is a standard MediaTek scatter firmware. Using Infinity CM2 with the correct flash file, DA file, and preloader drivers, you can successfully revive dead or bricked Nokia 2.4 units. Always verify the flash file’s integrity and match it to the exact TA-1235 variant to avoid irreversible damage.
Disclaimer: This information is for educational and professional repair purposes only. Flashing may void the warranty. Ensure you have the legal right to modify the device’s firmware.
Nokia TA-1235 (Nokia 150 2020) can be serviced using the Infinity-Box platform, specifically the Infinity [BEST] (BB5 Easy Service Tool)
. This tool allows users to flash firmware, reset forgotten security codes, and fix software-related issues like "Contact Service" errors or hanging on the logo. Infinity-Box
Watch this step-by-step guide on how to fix common software issues like dead boot or blinking keypad lights using a flash tool:
This report covers the Nokia 150 (2020) model TA-1235 Go to product viewer dialog for this item. nokia ta-1235 flash file infinity
flash file and the process for servicing it using the Infinity-Box toolset. Device Identification Model Name: Nokia 150 (2020) Go to product viewer dialog for this item. Model Number: TA-1235 Chipset: MediaTek (MTK) processor Platform: Series 30+ Infinity Tool Compatibility
For Nokia TA-1235, you primarily use the Infinity Chinese Miracle II (CM2) or Infinity BEST (BB5 Easy Service Tool) software modules.
Infinity CM2 MTK: Specifically used for MediaTek-based devices to read/write firmware (scatter files) and repair dead boot issues.
Infinity BEST: Often used for removing security codes or fixing "Hang on Logo" issues on newer Nokia feature phones like the TA-1235. Flash File Details
A "Flash File" (Firmware) is required to fix software-related issues such as:
Flashing the Nokia 150 (2020) model TA-1235 with the Infinity-Box (specifically using the CM2 tool or Infinity Best) is a common solution for resolving software issues such as "hang on logo," white screen, dead boot, or forgotten security locks. 1. Prerequisites for Flashing
Before starting, ensure you have the following ready to prevent errors during the process:
Infinity-Box Dongle: You must have the Infinity-Box hardware and the corresponding software installed (Infinity Best or CM2MTK).
Correct Flash File: Use the specific firmware for TA-1235. Using the wrong file can result in a dead device. The combination of a verified Nokia TA-1235 flash
USB Drivers: Install the MediaTek (MTK) USB Drivers on your PC so the tool can communicate with the phone's chipset.
Battery Level: Ensure the battery is charged to at least 50% to prevent it from dying mid-flash.
Quality USB Cable: Use a high-quality micro-USB cable for a stable connection. 2. Software & Firmware Details
The Nokia 150 TA-1235 is a feature phone built on the MediaTek chipset and runs on the Series 30+ operating system. Model Number: TA-1235 (Dual SIM). Processor: MediaTek. Storage: 4MB RAM / 4MB Internal Storage. 3. How to Flash Nokia TA-1235 with Infinity Best/CM2 Follow these steps to restore or unlock your device:
Open the Tool: Launch the Infinity Best or CM2MTK software on your computer.
Select Model: In the tool interface, select the correct model category (Nokia) and the specific model TA-1235.
Load Firmware: Click on the "Flash" or "Firmware" tab. Select the downloaded Nokia TA-1235 flash file (usually a .bin or .pac file depending on the tool version).
Initiate Flash: Click the "Write Flash" or "Flash Factory" button. Connect the Phone:
Turn off the phone and remove the battery once to reset the state. Reinsert the battery. Disclaimer: This guide is for educational and professional
Hold the "Boot Key" (usually the center OK button or Dial button) and connect the USB cable to the PC.
Flashing Process: The tool will detect the device and start writing the software. Wait for the "Flashing Done" or "Success" message before disconnecting. 4. Troubleshooting Common Issues Nokia 150 TA- 1235 CYAN Dual Sim - TD Africa
Follow these steps carefully to flash your Nokia TA-1235.
Warning: Flashing the wrong variant (e.g., TA-1235 from Latin America on an Asian device) will hard brick your phone permanently.
Unlike Qualcomm devices, MediaTek chips rely on a unique preloader and DA (Download Agent) file. The Infinity Box specializes in MediaTek recovery.
Infinity Box supports Nokia MTK devices via SP Flash Mode or Infinity AIO (All-In-One).
The Nokia TA-1235 (often marketed as the Nokia 2.3 in many regions) is a budget-friendly Android One device known for its durability and clean software. However, even the most reliable smartphones can fall victim to software corruption. A failed system update, a malicious app, or a botched root attempt can leave your device in a permanent boot loop, a "Qualcomm HS-USB QDLoader 9008" port, or a completely black screen—commonly known as a hard brick.
When this happens, the average user’s only recourse is a service center. But for professionals and enthusiasts, the solution lies in three things: a Flash File (Stock Firmware), a Miracle Box (Infinity), and the best crack/hardware tool.
This article provides a deep dive into sourcing, preparing, and flashing the Nokia TA-1235 flash file using the Infinity Chinese Miracle Box (CM2).