Since Norton Ghost is discontinued and lacks native UEFI optimization, most IT professionals and advanced users have switched to modern, actively maintained alternatives that fully support UEFI, GPT, and modern hardware:
Summary: You cannot obtain a legal, official link for a Norton Ghost ISO. Even if you find one, it is likely incompatible with modern UEFI systems without significant technical workarounds. It is highly recommended to use Clonezilla or Macrium Reflect for UEFI imaging tasks.
This guide outlines how to prepare, create, and use a Norton Ghost ISO for UEFI-based systems, utilizing tools to bridge the gap between legacy imaging software and modern boot architectures.
Note: Norton Ghost was discontinued in 2013. The methods below rely on the final versions (11.5/15) or Ghost Solution Suite, which can operate within a Windows PE environment to support UEFI. 1. Prerequisites Norton Ghost ISO:
A bootable Ghost ISO (e.g., Symantec Ghost 11.5.1 or Ghost Boot CD v12). USB Drive: At least 1 GB (minimum). Imaging Tool: (recommended) or RMPrepUSB. 2. Creating a UEFI-Compatible Bootable USB
Traditional Ghost DOS boot disks will not work on UEFI systems. You must use a WinPE-based ISO to ensure UEFI boot compatibility. Download/Acquire ISO:
Use a version that includes WinPE (e.g., Symantec Ghost Boot CD 12.0). Open Rufus: Connect your USB drive and run Configure Rufus: Select your USB Drive. Boot Selection: Choose the Norton Ghost ISO file. Partition Scheme: (for UEFI). Target System: UEFI (non CSM) File System: to burn the image to the USB. 3. Alternative: Ghost Solution Suite (Best for UEFI)
If you have access to Ghost Solution Suite 3.x, it natively supports creating UEFI boot media. Broadcom Community \Program Files (x86)\Symantec\Ghost\Bootwiz BootWiz.exe Create a new configuration using Windows PE 10
Select the USB drive as the destination to create a natively supported UEFI boot stick. Broadcom support portal 4. Booting and Using Ghost on UEFI How to Create A Bootable Norton Ghost USB Drive
What you need:
Step 1: Prepare the USB drive
Step 2: Create a bootable UEFI USB drive
Step 3: Configure the UEFI settings
Step 4: Boot from the USB drive and run Norton Ghost
Links:
If you need to download Norton Ghost or Rufus, here are the official links:
Tips:
Norton Ghost was a cornerstone of disk imaging for years, but its compatibility with modern
systems is a mixed bag due to its original design for older BIOS environments. community.spiceworks.com UEFI Compatibility Overview While legacy versions like Ghost 11.5
were designed for BIOS, newer iterations and community workarounds allow for UEFI support: Official Support : Newer versions within the Symantec Ghost Solution Suite (GSS)
, specifically version 3.0 and higher (current is 3.3+), officially support UEFI and GPT partitions. Legacy Issues
: Older standalone versions (Ghost 15 and earlier) often fail on UEFI systems unless Secure Boot is disabled and Legacy Boot (CSM) is enabled in the BIOS settings. The 64-bit Requirement : For UEFI booting, you typically need to use ghost64.exe
within a Windows PE (WinPE) environment, as standard DOS-based Ghost cannot communicate with UEFI firmware. community.norton.com Creating a UEFI-Bootable Ghost ISO/USB
To get Ghost running on a modern machine, you generally need to embed it into a bootable environment that supports UEFI: disk image with UEFI - Spiceworks Community
You're looking for information on Norton Ghost ISO UEFI links. Here's what I found:
What is Norton Ghost? Norton Ghost is a popular disk imaging and cloning software that allows users to create backups of their computer's hard drive or specific partitions. It was widely used for creating disk images, backing up data, and migrating to new hardware.
UEFI Support in Norton Ghost In 2014, Symantec (the company behind Norton) released Norton Ghost 2014, which added support for UEFI (Unified Extensible Firmware Interface) systems. UEFI is a modern firmware interface that replaces traditional BIOS. With UEFI support, Norton Ghost can now create and restore backups on systems with UEFI firmware.
Norton Ghost ISO UEFI Link The Norton Ghost ISO file is a bootable image that contains the Ghost software. To create a bootable USB drive or CD/DVD, you'll need to download the ISO file and then use a tool like Rufus or Etcher to create a bootable media.
Here are the links to download Norton Ghost ISO:
Creating a Bootable UEFI USB Drive To create a bootable UEFI USB drive, you'll need to:
Caution Please note that Norton Ghost is no longer actively developed or supported by Symantec. While it may still work on modern systems, there may be compatibility issues or limitations.
It's also worth considering alternative disk imaging and cloning software, such as:
These tools offer more modern features, better support, and compatibility with the latest systems and hardware. norton ghost iso uefi link
Creating a bootable ISO for Norton Ghost on modern UEFI systems is a common challenge because the original Norton Ghost (specifically versions up to 15) was primarily designed for legacy BIOS and MBR (Master Boot Record) partition schemes. While technically discontinued in 2013, the tool remains a favorite for its "ignore bad sectors" feature and reliable disk cloning capabilities. Compatibility and Limitations
Original Norton Ghost (v15 and older): These versions do not natively support UEFI/GPT systems. If you must use them on modern hardware, you typically have to enable Legacy Boot or CSM (Compatibility Support Module) in your BIOS settings.
Symantec Ghost Solution Suite (GSS): This is the modern professional successor. GSS 3.3 and later versions natively support UEFI, GPT, and even Secure Boot for creating and restoring images. How to Create UEFI-Bootable Ghost Media
If you are using the older ISO files, they are often just backup files and not inherently bootable on their own; you need a bootable environment to run the Ghost executable. 1. Using Ghost Solution Suite (The Official Way) Ghost version compatible with UEFI? | IT Management Suite
The Adventures of Alex and the Mysterious Case of the Non-Booting Laptop
Alex, a tech-savvy individual, was tasked with reviving an old laptop that had been lying dormant for months. The laptop, which had a UEFI firmware, was supposed to run Windows 10, but it had developed a nasty habit of not booting up. The error messages were cryptic, and Alex's initial attempts to troubleshoot the issue were in vain.
One day, while browsing through a forum, Alex stumbled upon a thread discussing the use of Norton Ghost to clone a hard drive. A user had shared an ISO image of Norton Ghost 15, which claimed to support UEFI booting. Intrigued, Alex downloaded the ISO and decided to give it a shot.
However, Alex soon realized that creating a bootable USB drive from the ISO image wasn't straightforward. The laptop's UEFI firmware was picky, and the usual methods of creating a bootable USB drive weren't working.
After some research, Alex discovered a crucial piece of information: to create a UEFI-bootable USB drive from the Norton Ghost ISO, one needed to use a tool like Rufus, and ensure that the USB drive was formatted in FAT32.
Here's the step-by-step solution Alex used:
The takeaway: Alex learned that to create a UEFI-bootable USB drive from a Norton Ghost ISO, one needs to:
By following these steps, Alex was able to revive the laptop and get it up and running smoothly.
Links:
UEFI-related links:
Norton Ghost ISO for UEFI: Legacy Tool in a Modern World Norton Ghost was once the gold standard for disk imaging and system backup. However, as modern computing shifted from the traditional BIOS to Unified Extensible Firmware Interface (UEFI) and GUID Partition Table (GPT) disk formats, many users found their trusty Norton Ghost ISOs failing to boot or recognize modern drives.
This article explores how to find a Norton Ghost ISO with UEFI support, the technical limitations of using this legacy software, and the best ways to bridge the gap between old-school imaging and modern hardware. Does Norton Ghost Support UEFI? Since Norton Ghost is discontinued and lacks native
The short answer is no, not officially. Standard versions like Norton Ghost 11.5 and 15.0 were designed before UEFI became the industry standard.
Legacy Limitations: Classic Ghost versions use 16-bit or 32-bit DOS environments that cannot communicate with UEFI firmware.
GPT Incompatibility: Older Ghost versions often fail to correctly handle the partition structure of GPT disks, which are required for UEFI boot.
Success with WinPE: Some community-modified ISOs use Windows PE (WinPE) as a boot environment. Because WinPE can be built to support UEFI, these custom "Ghost Boot CDs" can technically launch the ghost64.exe application on modern systems. Where to Find a Norton Ghost ISO for UEFI
Since Symantec (now Broadcom) has discontinued Norton Ghost, official download links are no longer available. Users typically rely on archive sites or community forums:
Internet Archive: You can often find historical snapshots of the Symantec Ghost Boot CD on Internet Archive, including versions like v12.0 Build 11436 that utilize WinPE for better hardware compatibility.
Ghost Solution Suite (GSS): For enterprise users, the modern successor is the Ghost Solution Suite by Broadcom, which officially supports UEFI, GPT, and Secure Boot.
Third-Party Repositories: Sites like SoftPortal or Apponic may host the original Norton Ghost 15 installer, which you can use to create your own recovery media. How to Create a UEFI-Compatible Bootable USB
To make a Norton Ghost ISO work on a UEFI system, you must prepare the bootable media correctly. How to use .GHO file on UEFI-GPT - Microsoft Learn
The vast majority of "classic" Norton Ghost ISO files circulating the internet (specifically versions like Ghost 11.5 or 12) are designed for the BIOS (Legacy) booting standard. They generally do not support the modern UEFI (Unified Extensible Firmware Interface) standard found in computers manufactured after 2012.
If you attempt to boot a standard Ghost ISO on a strictly UEFI machine (with CSM/Legacy mode disabled), it will fail to boot.
While Macrium has recently retired their "Free" version for new downloads, it remains one of the most reliable tools for UEFI cloning. Older free installers are widely available and legal for personal use if you can find them on reputable software archives.
Let’s say you want a bootable USB that works on any modern PC (UEFI, Secure Boot off/on):
No Ghost. No legacy BIOS tricks. No sketchy links.
Note: Hiren’s includes Ghost 12 from an old trial; it may be considered grey area but widely accepted as abandonware. For business use, buy Acronis.