Onkyo Rc-799m Remote Manual Guide

You need a 4-digit or 5-digit code for your device brand. (See the code table in Part 4 below).

The Onkyo RC-799M remote manual is more than just a button map—it is the key to unifying your home theater. By understanding how to program device codes, create macros, and perform resets, you transform a simple remote into a powerful control center.

Keep this guide bookmarked. Print the code table. And the next time your Samsung TV ignores volume commands or your cable box refuses to change channels, you will know exactly which page of the manual—or rather, which section of this article—to consult.

Last updated: 2025. For official support, contact Onkyo customer service or visit their legacy product page. If your RC-799M is physically damaged (dropped, liquid spilled), no manual can help—consider a replacement remote like the Onkyo RC-893M, which uses similar programming codes.

Onkyo RC-799M is a dedicated infrared (IR) remote control designed specifically for Integra A/V receivers

. It is widely used as a replacement for original models like the RC-707M, RC-738M, and RC-765M. Core Operation Guide For basic use with a compatible Onkyo receiver, no programming is required

; it works immediately upon inserting two AA or AAA batteries (depending on the specific version). Amazon.com Activating Control : To operate your receiver, you must first press the button on the remote. Powering On/Off ON/STANDBY button after selecting the receiver mode. Input Switching Input Selector

buttons (e.g., BD/DVD, CBL/SAT, GAME) to switch the receiver to a specific source. Zone 2 Control : Press the button followed by ON/STANDBY to power your multi-zone system. Programming for External Devices

controls Onkyo receivers out of the box, you can program it to operate other devices like TVs or cable boxes using the following steps: How to Configure Onkyo Settings Review

Onkyo RC-799M Remote Manual The Onkyo RC-799M is a standard infrared (IR) remote used with various Onkyo AV receivers. While it often works immediately after inserting batteries, you can also program it to control other devices like TVs or DVD players. 🎮 Programming for Other Devices

To control a TV or other component, follow these steps to assign a 5-digit remote control code:

Enter Setup Mode: Press and hold the REMOTE MODE button (e.g., TV, BD/DVD) while also holding the DISPLAY button for about 3 seconds. The Remote indicator/mode button should light up.

Input the Code: Within 30 seconds, use the number buttons to enter the 5-digit code for your device brand.

Confirm: If the code is accepted, the REMOTE MODE button will flash twice.

Test: Aim the remote at your device and press the Power button to see if it responds.

💡 Note: Codes cannot be assigned to the RECEIVER or ZONE 2 buttons. ⚙️ Key Button Functions

RECEIVER: Switches the remote to control the main Onkyo receiver functions.

REMOTE MODE: Selects which device you are currently controlling (TV, DVD, CD, etc.).

INPUT SELECTOR: Changes the audio/video source on the receiver.

HOME / SETUP: Accesses the on-screen menu for receiver settings.

TONE: Press repeatedly to toggle between "Bass" and "Treble," then use the dial or arrow keys to adjust sound quality.

DISPLAY: Shows current input/output information on the receiver's front panel or TV screen. 🛠️ Troubleshooting & Reset

Not Working?: Ensure you are using 2 AAA batteries. Most replacement versions of this remote do not require programming for the Onkyo receiver itself; they work "out of the box."

Resetting: On many Onkyo models, you can reset the remote by holding RECEIVER and HOME simultaneously until the indicator light stays on.

Direct Support: You can find official PDF manuals for the receivers this remote ships with (like the HT-RC330 or TX-SR309) on the Onkyo Product Support Page. AI responses may include mistakes. Learn more

Onkyo RC-799M is an infrared remote control specifically designed for Onkyo and Integra audio-video receivers. For most compatible receivers, it requires no initial programming and works "out of the box" after inserting two AA alkaline batteries. Amazon.com.au Programming Instructions

To program the remote to control other components (like a TV), use the following steps: Enter Programming Mode : Simultaneously press and hold the desired REMOTE MODE button and the

button for approximately 3 seconds until the light illuminates. Input Device Code

: Within 30 seconds, enter the 5-digit remote control code for your device using the number buttons.

: If the code is accepted, the REMOTE MODE button will flash twice. : Press the button to see if the external device responds. Compatible Models

The RC-799M is officially compatible with the following Onkyo AV Receiver models: Amazon.com.au HT-R Series : HT-R391, HT-R548, HT-R558, HT-R590, HT-R591 HT-RC Series : HT-RC330, HT-RC430 HT-S Series : HT-S3500, HT-S5400, HT-S5500 TX-SR Series : TX-SR309, TX-SR313 Key Resources Full Guide : A detailed Button Mapping and Functionality Guide for various modes (Receiver, TV, DVD, etc.). Official Downloads

: You can search for specific receiver manuals containing remote instructions on the Onkyo Downloads Page by entering your receiver's model number. Troubleshooting

: If the remote fails, test its signal by pointing it at a smartphone camera lens; you should see the infrared light flash on the screen when buttons are pressed. JustAnswer Do you need the 5-digit codes

for a specific brand of TV or DVD player to finish your setup?

If you own a home theater receiver from Onkyo’s mid-to-late 2000s era, particularly the acclaimed TX-SR series (like the TX-SR576, TX-SR506, or TX-SR606), you are likely very familiar with the Onkyo RC-799M remote control. This sleek, ergonomic wand is the command center for your entire entertainment system. However, like many sophisticated universal remotes, it can be daunting to use without the original manual.

Losing that paper manual is frustrating. You end up with a device full of buttons labeled “Dimmer,” “RT/PTY/TV,” or “CH SEL” that you never dare to touch. This article serves as your complete digital Onkyo RC-799M remote manual. We will cover every button, programming instructions, hidden codes, and troubleshooting tips to get your remote working like the day you unboxed it.

According to the official manual, follow these steps precisely:

Even the best remotes act up. Here are the three most common issues and fixes.

You don’t need the original manual for this—just follow these steps. Let’s use programming a Samsung TV as an example.

If your RC-799M is a learning or system remote that requires pairing:

If the remote supports discrete codes or device mode switching, try the following:

If the remote is a learning remote: