If the Orico device is not recognized at all, the issue might be your computer's USB controller drivers rather than the Orico driver.
The "SV" in UTH-SV often stands for a specific series capable of offline cloning. If you are trying to clone a drive:
Warning: Cloning wipes the target drive. Ensure you have
If you’ve spent hours on the driver hunt, consider these workarounds:
Last updated: June 2025
Article by: Storage Hardware Team
License: Free to share with attribution. Always back up your data before updating drivers or firmware.
Struggling with a different ORICO driver? Mention your model in the comments below, and we’ll help you troubleshoot. orico uth-sv driver
ORICO UTH-SV is a USB 3.0 to HDMI adapter (Silver) that relies on the Fresco Logic FL2000 chip
. To get this device working, you typically need to install the specific "UTH Drive" software. Where to Download the Driver You can find the official driver on the ORICO Software Download page Target Model: U3HV Series Direct Download: Search for the "ORICO UTH Drive Download" which specifically supports Windows systems. Device Specifications FL2000 56P Resolution: Supports up to 1920*1080P Supported OS: Windows 7, 8, 8.1, and 10 Compatibility Note: This device does support macOS. Installation Tips Run as Administrator:
After downloading the driver, right-click the setup file and select "Run as Administrator."
You will likely need to restart your computer after installation for the HDMI output to be recognized. USB 3.0 Port: Ensure the adapter is plugged into a blue USB 3.0 port
to achieve full 1080p resolution; plugging into a USB 2.0 port may limit resolution or cause lag. Manual Update: If the device isn't recognized, go to Device Manager If the Orico device is not recognized at
ORICO UTH-SV is a USB 3.0 to HDMI adapter designed to expand your laptop or desktop display to a secondary monitor or projector. It typically utilizes the Fresco Logic FL2000 chipset, which requires a specific driver to function. Key Features High-Resolution Output : Supports resolutions up to 1920 x 1080 (1080P) at 60Hz when connected to a USB 3.0 port. Dual Display Modes : Allows for Mirror mode (shows the same screen) or Extended mode (expands your workspace). Aluminum Alloy Build
: The silver (SV) housing is made of aluminum alloy for better heat dissipation and durability. Wide OS Support : Compatible with Windows 7, 8, 8.1, and 10. Driver & Setup Information
Because this device functions as an external graphics card rather than a standard cable, the FL2000 driver must be installed for the HDMI signal to transmit. Download Source : You can find official drivers on the ORICO Download Center under the "USB Graphics" or "UTH Drive" section. Installation Connect the adapter to a
port for full 1080P resolution (USB 2.0 ports may limit resolution to 800 x 600).
Run the driver installer and restart your computer if prompted. Warning: Cloning wipes the target drive
ORICO UTH-SV is a USB 3.0 to HDMI adapter designed to expand or mirror your laptop's screen onto a larger display or projector. Because it uses the Fresco Logic FL2000 56P chip , it requires a specific driver to function. Driver Download & Installation You can find the necessary software on the ORICO Download Center Search Term : Look for "ORICO UTH Drive" "USB 3.0 to HDMI Driver" Operating Systems : It is compatible with Windows 7, 8, 8.1, and 10 MacOS Support : This specific model does not support macOS Specifications Hardware Chip : FL2000 56P. Resolution : Supports up to 1920 x 1080P (Full HD). : Silver aluminum alloy for heat dissipation. : USB 3.0 input to HDMI-F output. Troubleshooting Tips If the adapter is not detected after installing the driver: Check the Port : Ensure it is plugged into a USB 3.0 port
(typically blue) to achieve 1080p resolution; USB 2.0 may result in lower resolution. Selective Suspend
: Disable "USB selective suspend" in your Windows Power Options if the connection drops.
: If the device is unrecognized, uninstall the current driver and download the latest version directly from the ORICO Technical Support Are you having trouble with a specific Windows version , or would you like a direct link to the driver file? Software download - ORICO
Short answer: No, but also yes.
For macOS Catalina (10.15) and later, Apple removed built-in support for many SATA bridge chips. The ORICO UTH-SV driver for macOS is essentially a third-party kext (kernel extension).