Pts162 Full
High-vibration environments are no issue due to the fully potted electronics. The 162 bar range exactly matches high-pressure precision spraying systems.
| Model | Travel | Power | Life | Typical Use | |-------|--------|-------|------|--------------| | PTS162 Full | 60 mm | 0.2 W | 15k | Portable audio | | PTS45 | 45 mm | 0.1 W | 10k | Miniature devices | | PTS01 | 100 mm | 0.25 W | 30k | Professional mixers | | Rotary pot | N/A | 0.5 W | 50k+ | General purpose |
The PTS162 Full acts as a standalone data recorder. With 16 MB of memory, it can store timestamped events (min, max, average) over 30 days at 1-second intervals. For remote sites without a PLC, technicians can retrieve CSV logs via the USB-C service port. pts162 full
Connecting the PTS162 full correctly is critical for achieving its rated performance. Below is the standard M12 connector pinout:
| Pin Number | Signal (Analog 4–20mA mode) | Signal (RS485 Modbus) | |------------|------------------------------|------------------------| | 1 | V+ (10–30V DC) | V+ | | 2 | Analog Out + | RS485 B (Rx/Tx-) | | 3 | GND (Common) | GND | | 4 | Not connected / Config pin | RS485 A (Rx/Tx+) | | 5 | Shield / Function ground | Shield / Function ground| High-vibration environments are no issue due to the
Pro Tip: For the PTS162 full to operate in full-speed mode (1 kHz sampling), you must connect pin 4 to GND via a 10k ohm resistor during power-up. This enables the "high-performance profile."
If using the 0–10V output, ensure the load impedance is > 10k ohms. For 4–20 mA, keep loop resistance below 500 ohms. | Model | Travel | Power | Life
A critical point: The "Full" designation is not just hardware—it's also firmware. The manufacturer releases quarterly updates (version 4.x and above). To maintain Full features:
Warning: Do not attempt to flash a Standard PTS162 with Full firmware. The bootloader checks hardware IDs; cross-flashing will brick the unit.
If you want, I can:
PTS162 Full is a model designation or firmware/package version commonly referenced in technical communities, particularly around embedded systems, networking hardware, or software releases. While exact specifics can vary by manufacturer or project, "PTS162 Full" typically denotes a complete (full) release of a PTS162-series product or software build. Below is a concise, practical blog-style overview you can use or adapt.