Once hardware is installed, you must load frequencies and talk groups.
| Parameter | Value | |-----------|-------| | Frequency Stability | ±2.5 ppm (-30°C to +60°C) | | Channel Spacing | 25 kHz (or 12.5 kHz optional) | | Preset Channels | Up to 100 (user programmable) | | Operating Voltage | 12–15 V DC nominal (vehicle) / 10–16 V DC (battery pack) | | Battery Type | Li-Ion 14.4 V / 4.4 Ah (hot-swappable) | | Power Output | 5 W (low), 25 W (high, manpack); up to 50 W (vehicular amp) | | Receiver Sensitivity | -117 dBm (20 dB SINAD typical) | | Adjacent Channel Selectivity | ≥70 dB @ 25 kHz | | Audio Output | 1 W @ 8 Ω (internal speaker), 5 mW (headset) | | Duty Cycle | 10% transmit, 90% receive (manpack, 25W) | | Environmental | IP67 (dust/water immersion), MIL-STD-810H | | Operating Temp | -30°C to +60°C | | Dimensions (HX-PRC6020) | 260 × 95 × 45 mm (without battery) | | Weight | 2.4 kg (with battery) |
Installing this radio into a vehicle or fixed site requires attention to grounding and power management.
A. Power Requirements
B. Antenna Systems (Critical)
HX PRC-6020 (often referred to as the PRC-6020GV ) is a combat-proven, high-frequency (HF) man-pack radio system designed for reliable voice and high-speed data communications in tactical environments. It belongs to the Tadiran HF-6000 family of multi-adaptive radio systems. Technical Data & Specifications
The system is characterized by its wide frequency coverage and advanced electronic counter-countermeasure (ECCM) capabilities. Elbit Systems UK Ltd Technical Specification Frequency Range 1.5000 to 29.99999 MHz 2,850,000 channels (10 Hz spacing) Pre-set Channels 100 programmable channels Output Power Selectable 5W, 10W, or 20W Modulation USB, LSB, and AM Up to 4800 bit/sec Receiver Sensitivity -110 dBm (10 dB SINAD) Battery Type 12V, 15Ah Lithium Sulphur dioxide (LiSO2) Operational Modes Frequency Management: radio set hx prc 6020 technical data install
Supports Fixed Operating Frequency (FOF) and Dual-frequency simplex (DFS). Automation: and optional Military Standard (Automatic Link Establishment) for rapid connection setup. Communication Types:
Supports analog and digital voice (with vocoders), telegraphy, and encrypted flash messages. Installation & Configuration
The PRC-6020 is modular and can be deployed in several configurations depending on the mission requirement: Elbit Systems UK Ltd Man-pack (PRC-6020): A compact integrated unit carried by a single operator. Vehicular (VRC-6020):
Low-power configuration (20W) installed in tactical vehicles. Fixed/Stationary:
Used in strategic sites or shipboard configurations, often paired with high-power amplifiers like the GRC-6400 (400W) or GRC-6600 (1000W). Key Installation Components:
Proprietary antennas designed for high performance; must be changed during startup or operation based on frequency selection. Power Input: Once hardware is installed, you must load frequencies
Uses a specific power input pin (Mtrl-Brass) and battery box lock mechanism (Mtrl-Aluminum) for secure attachment.
Requires 10 cryptographic keys and utilizes internal FPGA circuits (XILINX) for secure logic and codec conversion. Configuration Interface
Accessing the internal settings requires specific command codes: 00000 + ENT: Returns to the Main Menu. 10000 + ENT: Accesses the second channel programming screen. 20000 + ENT:
Allows viewing the load screen for security keys (Safe and AJ modes). or specific maintenance procedures for the PRC-6020 battery box and power input? PRC-6020 Radio Set Technical Overview | PDF - Scribd
Here is the technical data and installation summary for the HX PRC 6020 (manufactured by HYT / Hytera, a tactical handheld radio often compared to the PRC-152 form factor).
Note: If you meant a different model (e.g., PRC-152, PRC-6020 from another brand), please verify. The HX PRC 6020 is a waterproof, military-style VHF/UHF transceiver. Write to Radio: Click “Write” → Wait for
Before installation, identify the physical ports:
Step 1: Antenna Selection and Mount
Step 2: Battery Installation
Step 3: Audio Accessory Installation
Step 4: Functional Test
Step 1: AC Power Supply
Step 2: Permanent Antenna
Step 3: Remote Control & Data