Service Tool V1074 Canon Mp250 Download Link Page

Service Tool v1074 is a small utility software used by Canon technicians to reset the internal counters of Canon printers. For the MP250 series, this tool is the standard solution for clearing the "Waste Ink Absorber Full" error.

When your printer cleans its print heads, it ejects ink into a waste pad inside the machine. To prevent overflow, the printer counts these cleanings and stops working once a set limit is reached. Service Tool v1074 resets this counter, allowing you to print again.

⚠️ Important Warning: Before performing a reset, you must physically clean or replace the waste ink absorber pads. If you reset the counter without cleaning the pads, ink will eventually overflow inside your printer, causing a mess and potential circuit damage. service tool v1074 canon mp250 download link

1. The Tool is Not Responding If the software freezes or doesn't detect the printer:

2. "Error 006" or "Error 005" These errors usually mean the printer was not correctly put into Service Mode. Service Tool v1074 is a small utility software

3. Error 5B00 Returns Quickly If the error returns shortly after resetting, it means the waste pads are physically oversaturated and the sensor is detecting liquid ink. You must open the printer and clean or replace the waste pads before resetting the counter again.

| Problem | Likely Cause | Solution | |---------|--------------|----------| | "Tool not responding" | Wrong USB port selection | Press "USB PORT" button repeatedly until printer responds | | Error code remains after reset | Waste ink pads physically overflowed | Replace pads first, then reset again | | Printer not detected at all | Driver issue | Install Canon MP250 standard driver first, then use service tool | | Tool crashes on Windows 10/11 | Compatibility mode | Right-click → Properties → Compatibility → Run as Windows 7 | | "Device not found" message | Cable or power | Try another USB port, restart printer in service mode (hold Stop/Reset + Power) | service tool v1074 canon mp250 download link

Canon Service Tool v1074 (often written as STv1074) is a proprietary utility designed for service centers. It allows technicians to:

Is v1074 compatible with the Canon MP250?
Yes. While v1074 works with many Canon PIXMA models (MP230, MP240, MP260, MP280, MP490, MP499), it is specifically confirmed to work with the MP250. Using an older version (like v1040 or v1050) may fail to recognize your printer.