Once the emulator loads:
You should now see your SNES games displayed with their cover art. Use the Left/Right D-Pad to scroll through covers, or hold B + D-Pad for faster scrolling.
Insert your SD card into your computer. Ensure the directory structure is correct. If any folders don’t exist, create them manually.
SD Card Root/
├── apps/
│ └── Snes9xGX_CoverMod/
│ ├── boot.dol (the Cover Mod file)
│ ├── meta.xml (optional – from original Snes9x GX)
│ └── icon.png (optional)
├── snes9xgx/
│ ├── roms/ (place your SNES ROMs here)
│ ├── covers/ (place cover art images here)
│ ├── saves/ (auto-created for save states)
│ └── settings.xml (auto-created on first run)
└── snes9xgx.conf (optional config file)
Important naming rule:
The cover image file must match the ROM filename exactly, except for the extension.
Example:
ROM:Super Mario World.sfc
Cover:Super Mario World.png
For best results, use lowercase .png files and avoid special characters.
Before beginning the installation, ensure you have the following:
Enjoy your classic SNES games with that retro box art flair on your Wii
The Snes9x GX Cover Mod (also known as the "Cover Flow" mod) is a popular unofficial enhancement for the Nintendo Wii that transforms the standard text-based ROM list into a visually stunning, scrollable cover art interface. By replacing the vanilla Snes9x GX files with this mod, users can navigate their SNES library with a point-and-click IR interface and various display modes. Prerequisites for Installation
Before you begin, ensure your Wii is prepared with the following:
Homebrewed Wii: Your console must have the Homebrew Channel installed. Storage: An SD card or USB drive formatted to FAT32.
System Requirements: Your Wii should have IOS58 installed (standard on System Menu 4.3) and Homebrew Channel version 1.0.8 or later. Step 1: Download and Extract Files
Download the Mod: Locate the Snes9x GX Cover Mod files from reputable community sites like GBAtemp or Wiimpathy.
Extract: Use a tool like 7-Zip or WinRAR to unzip the folder. You will typically find two main folders: apps and snes9xgx. Step 2: Transfer to SD Card/USB
Backup Existing Files: If you already have the standard Snes9x GX installed, back up your snes9xgx folder (especially your saves and roms) before proceeding.
Copy Folders: Drag and drop the extracted apps and snes9xgx folders to the root of your SD card or USB drive. Apps: Contains the boot.dol file that runs the emulator.
Snes9xgx: Contains the covers, roms, cheats, and saves subdirectories. Step 3: Preparing Your Cover Art
The mod cannot display covers unless they are perfectly formatted. How to Add Rom Cover Art to SNES9x on Wii? snes9x gx cover mod install
The SNES9x GX Cover Mod is a popular enhancement for the standard Wii/Wii U emulator that replaces the traditional text-based list with a visual, scrollable "CoverFlow" interface similar to USB Loader GX. This mod allows you to browse your Super Nintendo library using 2D and 3D box art, providing a more modern and satisfying console experience. Installation Guide for SNES9x GX Cover Mod
To install the cover mod, you need a homebrewed Nintendo Wii or Wii U (vWii) with an SD card or USB drive formatted to FAT32. 1. Download and Prepare Files
Acquire the Mod: Download the specific "Cover Mod" or "Ultimate" version of SNES9x GX (often version 4.3.1 or newer) from repositories like the MarioCube Repository.
Extract Folders: Unzip the package. You will typically find two main folders: apps/snes9xgx: Contains the emulator executable (boot.dol).
snes9xgx/: Contains subfolders for roms, saves, cheats, and most importantly, covers. 2. Copy to SD Card or USB
Drag and drop both the apps and snes9xgx folders to the root of your storage device.
Place your Super Nintendo ROMs (usually .smc or .sfc files) into the /snes9xgx/roms directory. 3. Setting Up Cover Art
For the covers to appear, they must meet strict naming and formatting criteria:
File Name: The image file name must exactly match the ROM file name (e.g., Super Mario World.sfc requires Super Mario World.png). Format: Images must be in .png format.
Resolution: Set images to 316x224 pixels with a 32-bit depth for optimal display.
Directory: Place these images in /snes9xgx/covers/. Some versions support subfolders like /covers/2D or /covers/3D. 4. Enable Covers in Settings Launch SNES9x GX from the Homebrew Channel. Navigate to Settings > Menu.
Find the Preview Image option and change it to "Covers" (or Artwork/Screenshots depending on your preference).
Ensure the Covers Path in the settings points correctly to your covers folder. Troubleshooting and Performance
Images Not Showing: Double-check that your .png filenames match your ROMs exactly, including spaces and capitalization.
Memory Issues: If you have a very large library (e.g., 800+ ROMs), the emulator may struggle to load all covers at once. If you see "?" icons, try pressing the Home button and selecting "Reload Cache".
Channel Installer: For quicker access from the Wii System Menu, use the SNES9x GX Channel Installer to create a forwarder channel. Once the emulator loads:
To install and set up game covers for (or its popular "Cover Mod" forks like
), follow these steps to prepare your SD card and configure the emulator settings. 1. Prepare Your SD Card Ensure your SD card is formatted to Folder Structure
: On the root of your SD card, you should have a folder named (or the specific name of your mod, like Create Covers Folder : Inside that folder, ensure there is a subfolder named Subcategories
: For better organization, you can create further subfolders inside Screenshots 2. Add and Format Cover Art
The emulator requires specific image parameters to display covers correctly. Snes9X.COM Matching Names : Every image file
have the exact same filename as its corresponding ROM (e.g., Super Mario World (USA).png Super Mario World (USA).sfc Image Format : All images must be in Resolution : The standard resolution for SNES covers in this mod is 316x224 pixels : Ensure the image bit depth is set to Snes9X.COM 3. Install the Emulator/Mod If you haven't installed the emulator yet: : Obtain the latest files for or a specialized fork like : Copy the folder from your download to the root of your SD card. : Open the Homebrew Channel
on your Wii and select the emulator to run it for the first time. 4. Configure Emulator Settings
Once the emulator is running, you must tell it where to look for your images: Settings > File Browser (or "Directories") and set the Artwork Path snes9xgx/covers Enable Previews Settings > Menu and change the Preview Image
setting to "Covers," "Screenshots," or "Artwork" depending on what you installed. Save Settings : Ensure you exit to the main menu so the settings.xml file updates. Snes9X.COM Popular Mod Variants Key Features
Enhanced cover art support and PS3 DualShock 3 controller compatibility. Snes9x TX Installation
High-performance fork with MSU-1 (CD-quality audio) support. Snes9x RX Setup reputable websites to download pre-sized cover art packs for your library? How to Add Rom Cover Art to SNES9x on Wii?
To install the Snes9x GX Cover Mod (often referred to as or simply adding cover art to the standard GX version), you must place correctly formatted image files into a specific folder on your SD card and enable the preview setting within the emulator. Installation & Setup Steps Format the Images File Format : Images must be in Resolution : Set the resolution to exactly bit depth.
: The image filename must match your ROM filename exactly (e.g., SuperMario.sfc SuperMario.png Transfer to SD Card Connect your Wii/Wii U SD card to your computer. Navigate to the folder on the root of your SD card. Place your images into the
Note: If the folder doesn't exist, create it manually or check your settings.xml file for the defined path Enable Covers in Snes9x GX from your Homebrew Channel. Preview Image option and cycle through until it says (or Artwork/Screenshots depending on your preference). Snes9X.COM Alternative: Snes9x TX
For a more modern experience with built-in "Cover Flow" style layouts, many users prefer the Key Feature
: It is an upgraded version of GX that supports 2D and 3D box art out of the box. You should now see your SNES games displayed
: Download the latest Snes9x TX zip, extract it, and merge the folders with those on your SD card root. Helpful Resources Cover Packs : You can find pre-made cover packs on community sites like or specialized forums. Source Code
: Technical details and official updates are available on the Snes9x GX GitHub : For a visual walkthrough, check the Ultimate Wii U Guide which covers cover downloads. for the US SNES library? How to Add Rom Cover Art to SNES9x on Wii?
Snes9x GX Cover Mod is a popular enhancement for the standard Wii/vWii emulator that adds a visual "Coverline" or grid layout for game selection, replacing the default text list. Installation Guide
To install the cover mod, you generally need to replace your existing Snes9x GX application files with a modded version or a fork like Prepare Media : Ensure your SD card or USB drive is formatted to Download Files
: Obtain the modded Snes9x GX (Cover Mod) or Snes9x TX build. These are often distributed as files containing an folder and a ) root folder. Transfer to SD/USB folder from the directory into your storage device's Place the root folder (containing ) into the root of your SD/USB. Add Covers Covers must be in The file name must exactly match the ROM file name (e.g., Super Mario World.smc Super Mario World.png Place images in the snes9xgx/covers/ directory. Launch & Configure : Open the emulator via the Homebrew Channel . Navigate to Settings > UI Settings and look for options like Display: Covers View: Coverline to activate the visual menu. Snes9X.COM Review: Is it worth it?
How to Install Snes9x TX Emulator on the Nintendo Wii / Wii U! 4 Nov 2024 —
To install the Snes9x GX Cover Mod, you generally need to replace your existing emulator files with the modded version that supports a graphical cover flow interface instead of a simple text list. Prerequisites A homebrewed Nintendo Wii or Wii U. An SD card (recommended) or USB drive formatted to FAT32.
The Snes9x GX Cover Mod files (often found as a boot.dol file or a complete apps folder). Installation Steps
Prepare Files: Download the cover mod version of Snes9x GX. Extract the .zip or .rar folder using software like 7-Zip. Copy to SD Card:
Place the snes9xgx folder from the mod into the apps folder on your SD card root (e.g., SD:/apps/snes9xgx/).
Ensure there is a main configuration folder on the root of your SD card at SD:/snes9xgx/. Add Covers: Place your cover images (box art) in SD:/snes9xgx/covers/.
Crucial: Images must be in .png format, named exactly the same as your ROM file (e.g., Super Mario World.sfc requires Super Mario World.png). Recommended resolution is 316x224 pixels at 32-bit depth. Launch & Configure: Open the Homebrew Channel on your Wii and launch Snes9x GX. Go to Settings > Menu.
Change the Preview Image setting to "Covers" to enable the visual display. Common Troubleshooting
Covers Not Showing: Double-check that the filename of the .png matches the ROM name character-for-character.
Pathing: If covers still don't appear, verify the "Cover Directory" in the emulator's settings menu points to the correct folder on your SD/USB.
Channel Installer: To launch the mod directly from the Wii System Menu, you can install a Forwarder WAD using a tool like Wii Mod Lite.
Here’s a concise report on installing the cover mod for Snes9x GX (the Wii/GameCube SNES emulator).