Good sources (sorted by reliability):
| Source | Notes | |--------|-------| | 4pda forum (RU) | Most comprehensive – search "TX3 Mini firmware" | | Tanix official (tanix-box.com) | Often outdated but safe | | Aidan's ROM (ATV) | Popular custom Android 9/10, good for S905W | | Chinex TV Box (YouTube) | Step-by-step videos with links |
Search keywords to use:
TX3 Mini PCB version V3.2 firmware 2024
TX3 Mini SV6051 Android 9
Tanix TX3 Mini 2GB/16GB firmware
Typical firmware types:
Write down the chip number. You cannot proceed without it.
Use this if your box is stuck on the logo or won't boot.
This guide assumes you want to install a clean firmware via PC. Do not rely on OTA (Over-the-air) updates for major version changes.
You cannot copy the firmware to a USB stick and click "Update." Amlogic boxes require a PC and special tools.
Hardware Required:
Software Required:
| Problem | Cause | Solution |
|---------|-------|----------|
| No Wi-Fi after flash | Wrong Wi-Fi driver in firmware | Flash correct driver ZIP via TWRP or reflash ROM with matching driver |
| Box stuck in bootloop | Corrupt boot partition | Reflash via USB Burning Tool (erase flash & bootloader options ticked) |
| Remote not working | Different remote IR codes | Replace remote.conf or remote.tab1 in /vendor/etc/ with correct one from stock ROM |
| USB Burning Tool no connection | No world cup driver or short unsuccessful | Install driver manually (C:\Program Files\Amlogic\USB_Burning_Tool\WorldCup_Device\InstallDriver.exe). Try shorting NAND pins (labeled R19 or SW1 near USB port). |
| Netflix widevine L1 missing | Hardware limitation of S905W (only L3) | Use Kodi + Netflix add-on (720p max) OR buy a newer box (Amlogic S905X4). |
The Tanix TX3 Mini firmware is a paradox.
The Bottom Line: You don't buy the Tanix TX3 Mini for the firmware it has; you buy it for the firmware it deserves. If you are willing to spend an hour flashing new software, you get a device that punches way above its weight class. If you just want to watch YouTube and relax, buy a Chromecast or a certified Xiaomi Mi Box. The Tanix is for the people who like to build their own engines before driving the car.
Tanix TX3 Mini is a budget-friendly Android TV box powered by the Amlogic S905W tanix tx3 mini firmware
chipset. Flashing or updating its firmware is a common way to resolve performance issues, fix "bricked" devices, or install custom ROMs like Aidan’s ROM for better optimization. Firmware Options
: Original Android 7.1.2 firmware designed specifically for the TX3 Mini hardware. Aidan’s ROM
: A popular custom Android TV ROM optimized for Amlogic devices, though it may require specific drivers for WiFi and remote control functionality. CoreELEC/LibreELEC
: Specialized Linux distributions that allow the box to run as a dedicated media center from an SD card. Flashing Process There are two primary methods for updating the firmware: USB Burning Tool (PC Method) Connect the TX3 Mini to a PC using a USB-A to USB-A cable While holding the AV reset button
(located inside the AV port) with a toothpick, plug the cable into the box's lower USB port. Use software like PhoenixSuit
or Amlogic USB Burning Tool to load the firmware image and start the flash. SD Card Method Create a bootable SD card with the firmware image.
Insert it into the box and hold the AV reset button while powering on to trigger the automatic update. Critical Considerations
: Flashing firmware carries a risk of "bricking" the device; ensure you have the correct image for your specific hardware revision. VFD Display
: Some firmware updates may cause the front LED (VFD) display to stop working or require additional configuration files ( ) to restore functionality. Post-Flash
: A successful flash will typically take several minutes to boot for the first time. CoreELEC Forums or a link to a specific custom ROM
[English] How to flash firmware for TX3 Mini TV box, so smooth!
Updating the Tanix TX3 Mini firmware is a common way to resolve boot loops, fix software bugs, or upgrade the Android version
. The process generally requires a computer, a specific USB cable, and the Amlogic USB Burning Tool. Prerequisites A PC and a USB A-to-A (male-to-male) data cable. Amlogic USB Burning Tool: Usually version 2.0.7 or newer. Firmware Image (.img): Good sources (sorted by reliability): | Source |
Ensure you have the correct image for your specific RAM/Storage variant (e.g., 1GB/8GB or 2GB/16GB). Recovery Tool:
A small pin or paperclip to press the internal reset button. Installation Steps Prepare the Tool: Install and open the Amlogic USB Burning Tool on your PC. Change the language to English if necessary. Load Firmware:
Click "File" > "Import Image" and select your downloaded TX3 Mini firmware Configure Settings:
Ensure "Erase Flash" and "Erase Bootloader" are checked (standard for a clean install), then click the Connect Device: Hold down the Reset button
(located inside the AV port or at the bottom of the device). While holding the button, plug the USB cable into the USB port closest to the TF card slot
The tool should recognize the device and start the flashing process automatically.
Once the progress bar turns green and shows "100% Burning successfully," click "Stop," unplug the device, and boot it up. Alternative: SD Card Update If the device still boots, you can sometimes update via a Copy the firmware to a FAT32 formatted SD card or USB drive. Update app
on your TX3 Mini, select "Local Update," and choose the file.
Flashing incorrect firmware can permanently damage ("brick") your device. Always verify your hardware version before starting. specific firmware version (like Android 7.1 or 9.0) or a link to the latest USB Burning Tool Tanix TX3 USB Firmware Recovery TX3 How To Fix
How to Update Tanix TX3 Mini Firmware: The Complete Guide Keeping your Tanix TX3 Mini updated is the best way to ensure smooth performance, fix annoying bugs like system freezing, and stay current with the latest apps. Whether you're looking for a simple over-the-air (OTA) update or need a full manual reflash to fix a "bricked" box, this guide covers every step. Why Should You Update Your Firmware?
Updating the firmware on your Android TV box modifies the embedded software to improve how the hardware runs. For the Tanix TX3 Mini, recent updates have introduced:
Performance Fixes: Solves system freezing or slow performance after long periods of use.
App Enhancements: Updates for critical apps like Netflix, Google Play Store, and AirScreen. Typical firmware types:
New Features: Addition of virtual WiFi functions and removal of intrusive status bar icons. Stability: Fixes for video playback freezing issues. Option 1: The Easy Way (OTA Updates)
If your device is still functional, the easiest way to update is through the built-in UPDATE&BACKUP APP.
Open the App: Locate and launch the UPDATE&BACKUP app already installed on your TX3 Mini.
Check Online: Select Online Update to see if a new version is available on the server.
Download & Install: If an update appears, follow the prompts to download and restart your device to apply the changes. Option 2: Manual Update (via USB or SD Card)
If no online update is found, you can manually load the firmware file.
Download Firmware: Obtain the correct firmware image (typically a .img or .zip file) from a reliable source like the Tanix Firmware Centre.
Prepare Media: Copy the file to the root directory of a USB drive or SD card.
Launch Update: Connect the media to your TX3 Mini, open the UPDATE&BACKUP app, and select the local file to begin the update. Option 3: Full Reflash (For Stuck or Bricked Devices)
If your box won't boot or you want to install a custom ROM like Aidan's Android TV 9, you’ll need to "flash" it using a computer. What You’ll Need: A Windows PC. A USB-A to USB-A (male-to-male) cable.
Amlogic USB Burning Tool (v2.1.7.0 or higher is recommended).
The correct firmware image for your specific chip (e.g., Amlogic S905W or Allwinner H313). Step-by-Step Flashing: Tanix TX3 USB Firmware Recovery TX3 How To Fix