1e3d Pid 198a Top - Usb Device Id Vid

If you have tried every driver from Dell, Lenovo, HP, and Chicony, and the device still fails with "Code 10" or "Code 43," it is time to investigate hardware failure.

Disable it: Right-click in Device Manager → Disable device. This removes the yellow exclamation. You lose fingerprint login, but your system will boot faster without attempting to initialize a broken device.

The device VID 1e3d PID 198a is a Chicony Electronics Integrated Webcam. It is a standard USB Video Class (UVC) device designed for video conferencing, commonly manufactured for integration in Toshiba and Acer laptops. It requires no specialized drivers on modern operating systems.

The USB device with generic flash drive manufactured by Chipsbank Microelectronics Co., Ltd

. This specific ID combination is frequently found in high-capacity but low-cost USB drives, often sold on marketplaces like AliExpress. devicehunt.com 📋 Technical Device Profile Manufacturer (VID): Chipsbank Microelectronics Co., Ltd. (1e3d) Product (PID): Flash Disk / UDisk (198a) Typical Controller: USB 2.0 (High Speed) Current Draw: Typically 100mA devicehunt.com ⚠️ Common Usage & Risks

Devices using this ID are often flagged in the tech community for quality and authenticity issues: Fake Capacity:

This controller is commonly used in "fake" drives that report a high capacity (e.g., 64GB, 2TB, 16TB) but only contain a fraction of that storage. Data Corruption:

When the real storage limit is hit, the drive may continue to "accept" files by overwriting old data, leading to total data loss. Read/Write Speeds:

Performance is generally low, often inconsistent with modern USB 3.0 standards despite being marketed as such. superuser.com 🛠️ Troubleshooting & Recovery

If your device is failing or showing incorrect capacity, the following steps are standard for Chipsbank controllers: Identification: Use tools like ChipGenius Flash Drive Information Extractor to confirm the specific controller model (e.g., CBM2199E). Repair Tools: CBM2099 UMPTool

are often used to re-flash the firmware or "reset" the drive to its actual hardware capacity. Hardware Reset:

In extreme cases where the drive is not recognized, some users manually short pins 29 and 30 on the controller to enter "Test Mode". superuser.com Recommendation:

If you have critical data on this drive, back it up immediately. These generic Chipsbank drives are prone to sudden hardware failure and should not be used for primary storage. How would you like to proceed? specific firmware tool for your controller version or provide steps to verify the true capacity of your drive. Chipsbank Microelectronics Co. Ltd - USBDev.ru

Understanding USB Device ID: VID 1E3D PID 198A The USB device identifiers VID 1E3D and PID 198A are specific codes that identify a hardware product produced by Chipsbank Microelectronics Co., Ltd.. In technical terms, the VID (Vendor ID) 1E3D points to Chipsbank, while the PID (Product ID) 198A typically represents a "Flash Disk" or a generic USB mass storage controller. Technical Specifications and Device Role usb device id vid 1e3d pid 198a top

This combination is most commonly associated with budget-friendly USB flash drives and memory card readers. Because Chipsbank provides controllers to many third-party manufacturers, you might find this ID on devices branded as Lenovo, General UDisk, or even unbranded promotional "giveaway" sticks.

Controller Models: Often utilizes the CBM2098, CBM2099, or CBM2198A series of controllers. Protocol: Generally supports USB 2.0 High Speed.

Performance: Speed tests typically show read speeds between 10–45 MB/s and write speeds between 3–17 MB/s, depending on the specific NAND flash paired with the controller. Common Issues and Recovery

Devices with this ID frequently encounter "write protection" errors or appear as "unrecognized" in Windows because of firmware corruption or "fake capacity" issues (where a drive reports more storage than it physically has).

If your device is malfunctioning, you may need specialized mass production tools (MPTools) to re-flash the controller. Common utilities for this VID/PID include: Chipsbank Microelectronics Co. Ltd - USBDev.ru

The USB device identified by VID 1E3D and PID 198A is a mass storage device utilizing a controller from Chipsbank Microelectronics Co., Ltd.. This specific hardware ID is commonly associated with budget or "no-name" USB flash drives, often sold as promotional items or through online marketplaces like AliExpress. Technical Specifications Manufacturer: Chipsbank Microelectronics Co., Ltd.

Controller Models: Frequently uses CBM2199 series chips (including CBM2199S, CBM2199E, or CBM2199A). Protocol: USB 2.0 (High Speed).

Performance: Performance varies significantly by the flash memory paired with the controller:

Read Speeds: Typically range from 10 MB/s to 45 MB/s depending on drive capacity. Max Current: 100mA. Performance & Reliability Review Chipsbank Microelectronics Co. Ltd - USBDev.ru

USB devices featuring Vendor ID 1E3D and Product ID 198A are identified as products utilizing Chipsbank Microelectronics controllers, frequently found in generic, budget-friendly flash drives. These devices often use the CBM2199E controller, operate under USB 2.0 speeds, and can be managed using standard Windows mass storage drivers. For detailed identification and technical specifications, visit DeviceHunt USB\VID_1E3D = Chipsbank Microelectronics Co., Ltd

The USB device ID VID 1E3D PID 198A identifies a Flash Disk or USB Mass Storage Device. Device Identification

Vendor: Chipsbank Microelectronics Co., Ltd. (Vendor ID: 0x1E3D).

Product: Flash Reader or Generic Flash Disk (Product ID: 0x198A). If you have tried every driver from Dell,

Internal Hardware: This device often uses the ChipsBank CBM2199S controller. Technical Details

According to reports from DeviceHunt and user logs on Reddit, the device typically has the following specifications: Protocol: USB 2.0 (High Speed). Power Consumption: Maximum current of 100mA. Revision: Device Revision 0100; Product Revision 5.00. Troubleshooting and Tools

If you need to verify this ID or find drivers, you can use these operating system tools:

Windows: Open Device Manager, right-click your device, select Properties, and go to the Details tab to view "Hardware IDs".

Linux: Run the lsusb command in the terminal to list all connected USB devices and their IDs.

Third-Party Utilities: Tools like USBDeview from NirSoft can provide extended information, including the last time the device was connected and its serial number.

How do I check the PID and VID of my USB device? - Synology KB

USB Device ID VID 1E3D PID 198A identifies a mass storage device manufactured by Chipsbank Microelectronics Co., Ltd

. These identifiers are most commonly associated with low-cost or "no-name" USB flash drives, often using the Chipsbank CBM2199 series controller. DeviceHunt Technical Breakdown Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.). Product ID (PID): 198A (Flash Disk / Mass Storage Device). Common Controller: CBM2199E or CBM2199S. Device Type: USB 2.0 High Speed Mass Storage. DeviceHunt Why You Might See This ID This specific ID frequently appears in two scenarios: Generic "No-Name" Drives:

Many unbranded metallic or plastic "key" drives sold in bulk or as promotional items use this Chipsbank hardware. Fake Capacity Devices:

This ID is often found in "fake" storage devices (e.g., drives labeled as 2TB or 16TB that are actually 8GB or 32GB). The Chipsbank controller is modified to report a false capacity to the operating system. Super User Troubleshooting & Recovery

If your device shows "No Media," "Write Protected," or "Please Insert Disk," it often indicates a firmware corruption or a failed flash chip.

Based on hardware identification databases and user reports, the USB device with VID 1e3d and PID 198a is a generic flash drive controller manufactured by Chipsbank Microelectronics Co., Ltd.. Hardware Overview Manufacturer: Chipsbank Microelectronics. Disable it : Right-click in Device Manager →

Controller Model: Typically identifies as CBM2199E, CBM2199S, or CBM209x series. Interface: USB 2.0 "High Speed".

Common Use: Found in budget or unbranded "no-name" flash drives, often sold on platforms like AliExpress or Amazon. Performance Review

According to user-submitted benchmarks on NirSoft's USB Speed Tests, performance is inconsistent and generally low: Read Speeds: Range from 10.33 MB/s to 48.00 MB/s.

Write Speeds: Extremely slow, typically between 3.08 MB/s and 17.20 MB/s.

Reliability: Poor. Users frequently report "fake capacity" issues where the drive claims to be large (e.g., 2TB or 16TB) but actually contains only 8GB–32GB of usable flash memory. Common Issues & Maintenance

Fake Capacity: Many devices with this VID/PID are identified as "fake" drives that overwrite data once they reach their true (much smaller) physical capacity.

Recovery Tools: If the drive becomes "Write Protected" or unrecognized, specialized Chinese production tools like Chipsbank UMPTool or APTool are often required to reflash the firmware and restore the true capacity.

Data Safety: Not recommended for storing important or original data due to the high risk of corruption and hardware failure.

Verdict: This is a low-end, generic controller often associated with counterfeit storage. If you own one, verify its true capacity with tools like H2testw before use.

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

Advanced users using tools like USBDeview or lsusb (Linux) may see the string "TOP" in the iProduct or iManufacturer field. This is not a brand—it is a firmware placeholder.

Some generic Chinese USB hubs and fingerprint readers sourced from Shenzhen factories use a common firmware template where "TOP" is the default string if the OEM did not flash a custom name. If your device is a no-name external USB dongle with this ID, "TOP" simply means "unbranded reference design."

However, on internal laptop components, "TOP" may indicate a Topro sensor using the TCI (TouchChip Interface) protocol.

Open PowerShell as Administrator and run:

net stop WbioSrvc
sc config WbioSrvc start= disabled

Restart your PC, then run:

sc config WbioSrvc start= demand
net start WbioSrvc

Welcome Back!

Login to your account below

Retrieve your password

Please enter your username or email address to reset your password.