Usb Download Cable Gev189 Driver Windows 10

If you are using this cable for GOWIN FPGA development, the driver is packaged with the IDE.

Before installing fresh, clean out remnants:

If you have exhausted all driver options and the GEV189 still fails, consider replacing it with a modern, Windows 10-compatible USB-to-RS232 cable. FTDI-based cables (e.g., FTDI FT232R) have excellent Windows 10 driver support and work with the same PLCs and industrial gear that the GEV189 was designed for.

Simply buy an FTDI USB-to-DB9 (male) serial adapter and use the pinout crossover if needed (check your equipment’s wiring diagram).

To install the GEV189 USB Download Cable driver on Windows 10, you must use the official Leica Geosystems drivers, as Windows Update typically does not provide them automatically. The cable, often identified by part number

, is a 5-pin USB data link used primarily for transferring data from Leica Total Stations to a computer. Download and Installation Steps Obtain the Drivers

Drivers are often supplied on a CD or thumb drive with the cable. If you lack the physical media, you can download the USB Cable Drivers GEV189/GEV195/GEV218 v1.70

or newer from authorized survey equipment support sites like Sunbelt Sales Manual Installation the downloaded ZIP file to a known folder on your computer. the GEV189 cable to a USB port. Device Manager (right-click the Start button and select it).

Locate the device with a yellow exclamation mark, often labeled as "USB Serial Converter" Right-click the device, select Update Driver , then choose "Browse my computer for driver software" Navigate to your extracted folder and click to complete the installation. Confirm Connection : Once installed, the device should appear under Ports (COM & LPT)

as a "Leica USB Serial Port" with an assigned COM port number (e.g., COM3). Troubleshooting Tips USB Driver Installation Guide - CommFront

To use the Leica GEV189 USB Data Download Cable on Windows 10, you must install the specific USB-to-Serial driver that allows your PC to recognize the instrument's 5-pin connection. Driver Compatibility & Download Usb Download Cable Gev189 Driver Windows 10

While older versions of the GEV189 driver were limited to Windows 7 or 8, updated versions are compatible with Windows 10 (32-bit and 64-bit).

Version 1.70: This is a widely recommended version for Windows 10 compatibility, often packaged for GEV189, GEV195, and GEV218 cables.

Official Sources: You can often find these drivers on official Leica support portals or authorized distributors like Sunbelt Sales and G2 Survey. Installation Guide

Preparation: Uninstall any older USB-to-Serial drivers to avoid COM port conflicts before starting. Installation:

Run the driver installer (often found on the CD provided with the cable or downloaded as a .zip).

If a "Windows Logo testing" warning appears, select "Continue Anyway"; this is standard for these specialized drivers and does not harm your system. Verification: Plug the GEV189 cable into your PC. Open Device Manager and check under "Ports (COM & LPT)." It should appear as a Prolific USB-to-Serial Comm Port. Data Transfer Software

After the driver is installed, you will need a software interface to actually download data from your Total Station (e.g., TS06, TS09, TS12). Common tools include: Software Downloads - G2 Survey

Leica GEV189 USB Download Cable is primarily used for transferring data between Leica Total Stations and a PC. While it is natively compatible with Windows 7 and 8, using it on Windows 10 often requires specific driver versions or manual installation steps due to its reliance on Prolific USB-to-Serial chips. Microsoft Community Hub Driver Installation for Windows 10

To ensure the cable works correctly on Windows 10, follow these guidelines: Official Driver Versions Driver Version 1.1.0.0

or later, which officially supports Windows 10 32-bit and 64-bit systems. Driver Sources : You can find the necessary drivers on the Leica Geosystems website or through specialized portals like DriverScape Manual Installation Steps Do Not Plug In Yet : Install the driver software connecting the cable to your PC. Device Manager : If the cable is not recognized, open Device Manager and look for a "USB device" with a yellow warning icon. Update Driver If you are using this cable for GOWIN

: Right-click the warned device, select "Update Driver," and navigate to the folder where you extracted the driver files. Verify COM Port : Once installed, the cable should appear under Ports (COM & LPT) as a "Prolific USB-to-Serial Comm Port". Common Issues & Troubleshooting PL2303 issues (Prolific USB to Serial Drivers) Win 11

3. Select "USB Smart I/O Controllers -->> USB to Serial/Parallel" 4. Select "PL2303 -- Driver & Software" <<-- for PL2303HXD chip. Microsoft Community Hub Windows 11 Prolific Driver Setup

Leica GEV189 USB Download Cable is compatible with Windows 10 (32 and 64-bit), although installation on modern systems often requires specific manual steps. This cable is primarily used to transfer data between Leica Total Stations and a computer. ООО "УГТ-Холдинг" Driver Download Sources

You can find the necessary driver files from several surveying equipment support sites: Sunbelt Sales : Offers the GEV189/GEV195/GEV218 USB Cable Drivers v1.70 as a 3 MB ZIP file. : Provides download links for Leica GEV189/GEV195/GEV218 USB Cable Drivers compatible with various Windows versions. SCCS Survey : Lists the v1.70 drivers under their instrument software knowledge base. Sunbelt Sales Windows 10 Installation Steps

If the driver does not install automatically, use this manual procedure: Cable Drivers - Support & Downloads | Sunbelt Sales

USB Cable Drivers GEV189/GEV195/GEV218 v1.70 ZIP 3 MB. Leica GS & CS & TS Driver Installation (XP/Win7) ZIP 52.6 MB. Sunbelt Sales Software Downloads - G2 Survey

Leica GEV189/GEV195/GEV218 USB Cable Drivers for Windows2000/XP/Vista/7. Drivers for Windows2000/XP/Vista/7/8/10. G2 Survey Ltd

The Leica GEV189 USB Download Cable (Part No. 734700) is a critical data transfer tool for connecting Leica total stations and digital levels to a PC. For Windows 10 users, proper driver installation is essential to ensure the cable is recognized as a virtual COM port for data exchange. Installation Steps for Windows 10

To successfully set up the GEV189 cable on a Windows 10 system, follow these steps: Using Data Exchange Manager with TPS800

GEV189 USB Download Cable is a critical piece of hardware used to connect Leica Total Stations and other surveying equipment to a PC for data transfer. While originally designed for older Windows versions, it is compatible with Windows 10 Manual Install:

provided the correct v1.70 (or newer) drivers are installed. 1. Download the Correct Driver

For Windows 10, ensure you are downloading the specific version meant for modern operating systems. v1.70 is standard for GEV189/GEV195/GEV218 cables. Official Sources: Drivers can be found on the Leica myWorld portal or through authorized distributors like Sunbelt Sales Alternative Packages: If the standalone driver fails, some users install the Leica Viva USB Drivers

package (Setup_Leica_USB_64bit.exe), which includes the necessary components for Windows 10 64-bit. 2. Installation Steps for Windows 10

If the driver does not auto-install when you plug in the cable, follow these manual steps: Extract Files:

Download the driver ZIP file and extract it to a known folder (e.g., your Desktop). Open Device Manager: Right-click the button and select Device Manager Identify the Cable:

Plug the GEV189 cable into a USB port. Look for an "Unknown Device" or a device labeled FT232R USB UART

(often under "Other devices") with a yellow exclamation mark. Update Driver: Right-click the device and select Update driver Browse my computer for drivers

Navigate to the folder where you extracted the driver files. Ensure you select the folder containing files for "Windows 7/8/10". Complete the Process:

Windows may install the "USB Serial Converter" first. You might need to repeat the process for a second entry that appears as "USB Serial Port" to fully assign a COM port. 3. Verification

Once installed, the cable should appear in Device Manager under Ports (COM & LPT) USB Download Cable (COMx)

. Note the COM port number (e.g., COM3), as you will need to select this in your data transfer software (like Leica Geo Office or Infinity). USB Driver Installation Guide - CommFront