Vijeo Designer 61 Reference Serial Number Work
If the serial number is not "working," it is usually due to one of the following reasons:
A. Wrong Version
B. Demo Mode / 30-Day Trial
C. CodeMeter Issues
D. Hardware Key (Hasp/Dongle)
Understanding how the reference serial number works in Vijeo Designer 6.1 is not merely an administrative task—it is the key to reliable HMI deployment. From initial software activation to matching the project with the physical Magelis panel, the serial number acts as the digital handshake between your development environment and the factory floor hardware.
If you are encountering persistent failures, methodically check: the correct type of serial (software vs. runtime), registry integrity, antivirus exceptions, and target firmware version. For long-term stability, consider documenting your offline activation responses and planning a migration to EcoStruxure Operator Terminal Expert.
Remember: In industrial automation, a serial number that "does not work" is rarely a mystery—it is always a logical mismatch waiting to be resolved.
Need further help?
Visit the Schneider Electric Exchange Forum (formerly SE Community) and search for "Vijeo Designer 6.1 license reference." Include your exact error code (e.g., LIC-0012 or RUN-045) for targeted assistance.
This article is intended for informational purposes. Always refer to the official Vijeo Designer 6.1 user manual (part number: 31006825 01) for legally binding procedures.
Vijeo Designer 6.1 requires a Reference Number and a Serial Number for full activation. These are typically found on your purchased software DVD case or in the license email sent by Schneider Electric. 🛠️ Activation & Setup
If you are setting up Vijeo Designer 6.1, use the following methods based on your needs:
Fully Licensed Mode: Enter your unique purchased Reference and Serial Numbers during the installation wizard.
Trial Mode: Use Reference Number VJDSNDTGSV62M and any 11-digit numeric serial (e.g., 01234567890) for a 21-day full-feature trial.
Limited Edition: Leave both fields blank to use the software permanently for only the HMISTO and HMISTU series. 🔍 How to Find Your Serial Number
If the software is already installed and you need to retrieve your credentials: Open the Schneider Electric folder in your Start Menu. vijeo designer 61 reference serial number work
Launch the Registration Wizard (found under Vijeo-Frame for Buildtime or Vijeo-Runtime for Runtime). Select "Enter Received Authorization Code" and click Next.
The Serial Number and Part Number (Reference Number) will be displayed on the screen. 💡 Pro Tips for 6.1
Version Conflicts: You cannot have Vijeo Designer 6.1 and 6.2 installed on the same computer simultaneously.
Registration: After installation, you must register the software via the Schneider Electric License Manager to receive a permanent Authorization Code.
Run as Admin: Always right-click and Run as Administrator when installing to ensure registry paths are correctly updated. If you're interested, I can: Help you upgrade to 6.2 or 6.3 Provide a list of compatible HMI hardware Explain how to register via web or email Let me know how you'd like to proceed with your setup. How to Register Vijeo Designer Runtime - Schneider Electric
Here’s a feature idea for an "Indian Culture and Lifestyle" content platform (e.g., app, website, or YouTube channel):
If you have purchased a legal copy of Vijeo Designer 6.1, the serial number can be found in one of these locations:
Vijeo Designer is used to create screens, trend displays, alarms, recipes, and navigational logic for operator panels (Magelis terminals) and other display devices. Version 6.1 introduced features for improved graphics, tag handling, communication with PLCs (Modicon/Schneider and others), and licensing tied to project deployment.
Working with Vijeo Designer 6.1 involves understanding its features, ensuring proper installation with a valid serial number, and leveraging its capabilities for HMI design. If you're facing specific challenges, referring to Schneider Electric's official resources or technical support can provide targeted assistance.
To use the full features of Vijeo Designer 6.1 you must enter a valid Reference Number Serial Number during installation or through the License Manager after installation Schneider Electric Installation and Activation Fully Licensed Mode
: When prompted by the installation wizard, enter the Reference and Serial numbers found on your purchased packaging box or in the license email sent by Schneider Electric Trial Mode
: If you do not have a license, you can install the software in Trial Mode by using a generic reference like VJDSNDTGSV61M
(v6.1 specific) and any 11 numeric digits for the serial number (e.g., 01234567890
). Note that Trial Mode is typically limited to a specific number of days (e.g., 42 days). Limited Edition : Leaving both fields blank may install a Limited Edition version with restricted features. Schneider Electric Finding Existing License Details
If the software is already installed and you need to find the numbers used for registration: Launch the Vijeo Designer License Manager from the Start menu (found under the Schneider Electric "Enter received Authorization code" The next screen will display your current Serial Number Part Number (Reference), and Computer ID Schneider Electric Registration Process If the serial number is not "working," it
To permanently activate the software and remove limitations: Registration Wizard
found in the Vijeo-Designer installation directory (typically under \Vijeo-Frame\Registration\RegistrationWizard.exe Provide your Serial Number and Computer ID to the Schneider Electric Registration Center to receive an Authorization Code
Enter this code into the License Manager to complete the activation. Schneider Electric direct contact details
for the Schneider Electric registration center in your region?
How to find product Serial Number and Check Number | Official Support
Vijeo Designer 6.1 , the reference and serial numbers are the primary credentials used during installation to define the software's operational mode (Trial, Limited, or Fully Licensed). Schneider Electric Core Function of Credentials During the installation process, the InstallShield Wizard prompts for Customer Information , including a Reference Number Serial Number . These determine the software's capabilities: Fully Licensed Mode : Requires the unique Reference Number (e.g., VJDSNDTGSV61M
) and the 11-digit Serial Number provided with your purchased license. Trial Mode
: Entering the product reference with a generic 11-digit serial number (e.g., 01234567890
) typically grants a 21-day or 42-day trial with full functionality. Limited Edition Mode
: Leaving both fields blank allows for permanent use but restricts downloads only to specific HMI series like the Magelis STU and STO Registration & Verification
Once installed, the software must be registered to move beyond the initial grace period. Finding Existing Details
: If you need to recover the serial number used on an existing installation, launch the Vijeo Designer Runtime License Manager
from the Schneider Electric folder in the Start menu. Navigate to "Enter received Authorization code" to view the registered serial number. Activation Process : After installation, use the HMI License Manager to enter an Activation ID (formatted as ACT-XXXX-XXXX-XXXX ) to permanently register the product. Upgrade Path
: If you are looking for the reference number for a single-user license, it is typically listed as VJDSNDTGSV61M for version 6.1. Schneider Electric Critical Installation Note
To fully install and activate Vijeo Designer 6.1, you must enter the Reference Number and Serial Number provided with your purchase. 🛠️ Installation & Activation Steps communication with PLCs (Modicon/Schneider and others)
Launch Installer: Run INSTALL.EXE from your DVD or ISO file.
Enter Credentials: When prompted by the InstallShield Wizard, enter your Reference Number and Serial Number.
Note: If you leave these blank, the software may install in Demo/Limited mode. Registration:
Open the Registration Wizard (found in the Schneider Electric folder in your Start Menu). Select Enter Received Authorization Code and click Next.
The wizard will display your Serial Number, Part Number, and Computer ID.
Finalize: Send these details to your local Schneider Electric Registration Center to receive your permanent Authorization Code. 🔍 How to Find Your Serial Number
If the software is already installed, you can retrieve the serial number using these methods:
License Manager: Launch the License Manager from the Start Menu. Navigate to "Enter received Authorization code" and press OK; the registered serial number will appear in the next dialog.
Physical Label: Check the sticker on the DVD jewel case or the license certificate included in the original packaging.
Email: If you purchased a digital license, search your inbox for an emailed license from Schneider Electric or your distributor.
⚠️ Important Note: You cannot have both Vijeo Designer 6.1 and 6.2 installed on the same computer simultaneously. If you are looking to upgrade, you will need a specific upgrade part number (e.g., VJDUPDTGAV62M).
Do you need help locating your specific registration center or do you have a different version (like Vijeo Designer Basic)?
How to install Vijeo Designer as Demo/Trial/Limited Edition mode
The version 6.1 of Vijeo Designer likely brings enhanced features and improvements over its predecessors, including better performance, more intuitive design tools, and support for newer hardware.
If the project file (.vjp) is damaged, the reference serial number field may become uneditable or greyed out. Fix: Create a new blank project, copy-paste screens and scripts, then re-enter the serial.
