Xface Pro Zkteco Pdf -

Disclaimer: This article is for informational purposes. Product specifications and PDF availability are subject to change by ZKTeco. Always refer to official documentation provided with your specific hardware revision.

Introduction

XFace Pro is a facial recognition terminal developed by ZKTeco, a leading provider of biometric identification solutions. This guide will walk you through the features, installation, configuration, and usage of XFace Pro.

Features

Installation

Configuration

User Guide

Integration

Troubleshooting

Maintenance

Conclusion

XFace Pro by ZKTeco is a powerful facial recognition terminal that offers advanced security and convenience features. By following this guide, you should be able to install, configure, and use XFace Pro with ease. If you encounter any issues or have questions, refer to the user manual or contact ZKTeco support.

The ZKTeco xFace Pro Go to product viewer dialog for this item.

is a high-security multi-biometric terminal designed for time attendance and access control. It features advanced identification methods, including facial recognition, fingerprint scanning, and RFID card access. Key Features and Specifications

is notable for its speed and security, often used in environments requiring contactless authentication.

Recognition Technology: Utilizes Visible Light facial recognition for fast verification (often <0.5 seconds). Biometric Capacities: Faces: 3,000 templates.

Fingerprints: 5,000 templates using the SilkID reader, which handles dry, wet, and rough fingers. Cards/IDs: 20,000 proximity cards. Records: Up to 100,000 transaction logs.

Hardware & Display: Features a 2.8-inch TFT touch screen and a built-in 2,000mAh backup battery providing roughly 5 hours of operation.

Connectivity: Supports TCP/IP, Wi-Fi, and USB-Host for data management.

Security: Includes anti-spoofing technology to prevent fake face attacks (photos or videos) and is integrated with interfaces for locks, door sensors, and exit buttons. Essential PDF Resources Official documentation for the

and related "Pro" series (like the ProFace X) can be found through ZKTeco's service portals: xface pro zkteco pdf

Datasheets: Provide technical parameters and hardware specifications. You can view the ProFace X Datasheet at ZKTeco.

User Manuals: Detail device operation and menu navigation. A ProFace X User Manual is available at ZKTeco Brazil.

Installation Guides: Cover wiring for electric locks and network setup. Specific Installation Guides are hosted on ZKTeco Middle East. Initial Setup Tips Installation & User Guide - ZKTeco

The ProFace X is known for its "Touchless" verification capabilities and robust hardware. Recognition Speed: Under 0.3 seconds.

Capacity: 30,000 face templates (standard) or 50,000 (optional).

Environment: IP68 dust/waterproof and IK04 vandal protection.

Light Conditions: Functional from 0 lux (complete darkness) to 100,000 lux (bright sunlight).

Verification Modes: Facial, Card, Password, and Palm (specific models). 🏗️ Installation & Setup

Proper physical placement is critical for facial recognition accuracy.

Template: Use the mounting template sticker to drill holes in the wall. Backplate: Secure the backplate using wall mounting screws.

Security: Attach the device and fasten it with the security screw at the bottom. Network Configuration

To connect the device to your PC or software (like ZKBioAccess EP): Go to [Comm.] > [Ethernet].

Set the IP Address (ensure it is in the same segment as your server).

Default IP for many ZKTeco devices is 192.168.1.201 (though some cameras use 192.168.1.86). 👤 User Management & Registration

For security, register a Super Administrator during the first use to lock the menu. Local Registration (On Device) Tap the menu icon or press long-press the screen. Go to [User Mgt.] > [New User]. Enter User ID and Name.

Select [Face] to begin the facial capture process. Stand 0.5m to 2m away. Software Registration (Remote)

Via Web/Browser: If using ZKBioSecurity, users can register via a mobile phone by scanning a QR code generated in the [Personnel] > [Parameters] section of the software.

Data Sync: After adding users to the software, click [Device Control] > [Synchronize All Data] to push profiles to the terminal. Wiring & Connectivity

The ProFace X supports various peripheral connections for a complete security loop.

Lock Connection: Connects directly to electric locks (NO/NC) via the internal relay. Disclaimer: This article is for informational purposes

Exit Button: Connect to the dedicated "Exit Button" port for manual door release.

Wiegand: Can act as a reader for an external controller or accept input from an external reader.

RS485: Used for connecting to barrier gates or specialized 485 readers. Official Resources & Manuals

For the most detailed diagrams and firmware-specific instructions, refer to these official PDFs: ProFace X [P] - ZKTeco

Unlocking High-Speed Security: A Guide to the ZKTeco ProFace X Series

In the world of biometric security, the ZKTeco ProFace X series stands out as a top-tier solution for businesses needing fast, contactless, and reliable access control. Whether you're looking for the high-performance ProFace X [P] Go to product viewer dialog for this item. or the advanced ProFace X (DS)

with Dual Spectrum technology, this guide covers everything from key features to where you can find the official PDF manuals. Why Choose the ProFace X Series?

The ProFace X line is designed to handle high-traffic environments while maintaining a sleek, modern profile. Its standout feature is Visible Light Facial Recognition, which allows for a proactive verification process that is significantly faster than traditional near-infrared methods.

Ultra-Fast Verification: Recognizes faces in less than 0.3 seconds, even while users are walking or running.

Massive Capacity: Standard models support 30,000 face templates, with options to expand up to 50,000 for enterprise-scale needs.

Extreme Light Tolerance: Operates effectively in environments ranging from 0 lux (total darkness) to 100,000 lux (extreme sunlight), making it ideal for outdoor use.

Enhanced Hygiene: Fully contactless recognition combined with mask detection and optional body temperature measurement (on the [TD] and [TI] models) supports health and safety protocols.

Rugged Durability: Built to last with an IP68 waterproof rating and IK04 vandal protection. Key Specifications at a Glance Specification CPU 900MHz or 1.2GHz Customized AI Dual/Quad-Core Display 8" IPS High Light Touch LCD Face Capacity 30,000 (Standard) / 50,000 (Optional) Palm Capacity 5,000 (1:N) Log Capacity 1,000,000 to 2,000,000 Communication TCP/IP, Wiegand, RS485, Wi-Fi (Optional) Essential Resources: PDF Manuals & Guides

To get the most out of your ZKTeco device, it is critical to follow the official documentation for wiring and software synchronization. ProFace X DS | Dual Spectrum Face Recognition Terminal

The ZKTeco XFace Pro is a high-performance multi-biometric terminal designed for advanced time attendance and access control. It combines facial recognition, fingerprint scanning, and RFID card functions to provide a secure and flexible authentication solution. This terminal is particularly noted for its high-speed verification and robust security features, making it suitable for environments like hospitals, factories, and commercial buildings. Core Features and Performance

The XFace Pro leverages ZKTeco’s latest biometric algorithms to ensure accuracy and speed:

Rapid Verification: The device can verify faces in less than 0.3 seconds.

SilkID Fingerprint Technology: Features the advanced SilkID reader, which maintains stable performance under strong light and accurately reads wet or rough fingers.

Anti-Spoofing Capability: It includes sophisticated algorithms to detect and prevent "fake face" attacks, such as photos or videos.

Power Efficiency: An infrared sensor allows the terminal to automatically turn on when a user is detected, saving power during idle periods. Installation

Internal Backup Battery: Comes equipped with a 2000mAh battery that provides up to 5 hours of operation during power outages. Technical Specifications

For detailed technical planning, the following specifications are standard for the XFace Pro series: Display: 2.8-inch TFT touch screen. Face Capacity: Supports 3,000 face templates. Fingerprint Capacity: Supports up to 5,000 templates. Card Capacity: Up to 20,000 ID cards. Transaction Logs: Can store up to 100,000 records.

Communication: Integrated options for TCP/IP, USB-Host, and Wi-Fi. Operating Temperature: Ranges from 0°C to 45°C. Installation and Integration

The XFace Pro is designed for versatile deployment as a standalone system or integrated with third-party security hardware: ProFace X - ZKTeco

This guide summarizes the key resources and setup instructions for the ZKTeco ProFace X series (often referred to as ), a high-performance facial recognition terminal. Core PDF Resources User Manuals

: Comprehensive guides covering menu operations, user registration, and system settings are available from ZKTeco Brazil (PDF) ZKTeco's official Download Center Installation Guides

: These detail hardware mounting and wiring for power, door locks, and Ethernet. A Quick Start Guide

is often the fastest way to get physical installation completed. Datasheets

: Technical specifications, including recognition speed (< 0.3s) and capacity (up to 50,000 face templates), can be found on the ZKTeco EA product page Initial Setup & Default Credentials Default IP Address

: The factory default IP for many ZKTeco access control devices is 192.168.1.201

: If accessing through a web browser, common default credentials for ZKTeco Web 3.0 interfaces are administrator Admin Password

: For many standalone units, the initial password for unlocking the menu is ZKTeco Hong Kong Key Features & Capabilities X7 Access Control System User Manual V1.2.pdf (The initial password is 1234.) ZKTeco Hong Kong Installation & User Guide - ZKTeco (The default password is 1234.) www.zkteco.com.br

Answer & question – Official website of ZKTeco | Biometric security systems

If the device doesn't have admin, the login account and the password of the web 3.0 are administrator and 123456. ZKTeco Technology Multi-Biometric Verification

: Supports facial recognition, palm recognition, and RFID card/password modes. Anti-Spoofing

: Features advanced algorithms to protect against attacks using photos, videos, or 3D masks. Extreme Durability : Outdoor versions like the ProFace X [P ] are rated (waterproof) and (anti-vandal). Software Compatibility : Fully compatible with ZKBio CVSecurity for access control and ZKBioTime 8.0 for time and attendance management. Zkteco Europe Registration Methods User Mgt. > New User to register faces and palms directly on the touch screen. Via Software : Use the "Search Device" function in ZKBioAccess EP to add the terminal and sync personnel data. Mobile Enrollment

: Users can enroll their faces via a smartphone browser by scanning a QR code generated by the security software. device.report for a door lock, or do you need help resetting a forgotten administrator password X7 Access Control System User Manual V1.2.pdf (The initial password is 1234.) ZKTeco Hong Kong Installation & User Guide - ZKTeco (The default password is 1234.) www.zkteco.com.br

Answer & question – Official website of ZKTeco | Biometric security systems

If the device doesn't have admin, the login account and the password of the web 3.0 are administrator and 123456. ZKTeco Technology 2.8 inch Multi-Biometric Access Control - zkteco.me IP Address: 192.168. 1.201 is default. www.zkteco.me ProFace X - Zkteco.eu

Does the device say "Network timeout"? Or "Full memory"? The PDF manuals contain a comprehensive appendix of error codes and their solutions.

Hardware installation is the most critical phase. The PDF user manual contains precise wiring diagrams for connecting the xFace Pro to electric locks, exit buttons, alarm systems, and power supplies. Incorrect wiring can destroy the device or lock you out of a facility.