| SW1 | SW2 | SW3 | Microsteps | |-----|-----|-----|------------| | ON | ON | ON | 1 (full step) | | OFF | ON | ON | 2 | | ON | OFF | ON | 4 | | OFF | OFF | ON | 8 | | ON | ON | OFF | 16 | | OFF | ON | OFF | 32 | | ON | OFF | OFF | 64 | | OFF | OFF | OFF | 128 |
Before using the Zk-5kx, please read and follow these safety precautions: Zk-5kx Manual
Key takeaway from the Zk-5kx Manual: Always perform a "dry boot" (power on without the battery connected for 10 seconds) if the device fails to start on the first attempt. | SW1 | SW2 | SW3 | Microsteps
| Parameter | Value | |-----------|-------| | Input Voltage | 24–80 VDC (or 110–220 VAC, depending on variant) | | Output Current | 0.5–5.0 A (peak) | | Microstep Resolution | 1, 2, 4, 8, 16, 32, 64, 128 | | Protection Circuits | Over-voltage, over-current, short-circuit, thermal shutdown | | Control Signal | Opto-isolated: PUL, DIR, ENA (5–24 V logic) | | Operating Temp | -10°C to +50°C | Key takeaway from the Zk-5kx Manual: Always perform
Always verify the exact variant using the label on your device – the manual covers multiple sub-models.