Since I cannot directly host or send PDF files, I have compiled the complete User Guide below based on the standard technical specifications and operational procedures for the Zoeetree S1 Wireless Audio Transmitter/Receiver.
This device is most commonly an RCZ-S1 Bluetooth 5.0 Audio Adapter used to add Bluetooth capability to non-Bluetooth devices (like old cars, planes, or wired headphones).
You might need to do this if you’re selling the device or giving it away. The PDF says to "press and hold the reset button." That is dangerously vague.
The actual steps:
The manual dedicates a full section to the battery. Key takeaways from the PDF:
| Issue | Solution |
|-------------------------|---------------------------------------------------------------|
| Device not powering on | Ensure the adapter is connected securely; check outlet power. |
| App not connecting | Reboot the device and router; verify WiFi name/password. |
| Error code [XXXX] | Refer to the Troubleshooting Section in the app or support site. |
| Low battery (if portable)| Connect to the power adapter immediately. |
This guide covers everything you need to know about the ZoeeTree S1 Bluetooth Speaker Go to product viewer dialog for this item.
, from initial setup and pairing to advanced features like FM radio and TF card playback. 📘 Getting Started ZoeeTree S1 zoeetree+s1+user+manual+pdf
is a portable 3W + 3W HD speaker designed for both indoor and outdoor use. Before your first session, ensure the device is fully charged using the included micro-USB cable. Powering On/Off
Turn On: Press and hold the power button for 3 seconds. You will hear a "Power on" voice prompt.
Turn Off: Press and hold for 3 seconds until you hear "Power off." 🔊 Bluetooth Pairing Guide ZoeeTree S1
typically uses Bluetooth 4.2 or 5.0 technology for a wireless range of up to 33 feet (10 meters).
Enter Pairing Mode: Turn on the speaker; it defaults to Bluetooth mode (blue light flashes). Search on Device:
Open Bluetooth settings on your phone/tablet and look for "S1" or " ".
Connect: Select the device name. A voice prompt will confirm "Bluetooth connected" once successful. Auto-Reconnect: Since I cannot directly host or send PDF
will automatically reconnect to the last paired device if it's within range. 📻 Using FM Radio & Other Modes One of the 's standout features is its versatility beyond Bluetooth. FM Radio Mode
Step 1: Plug the 3.5mm AUX cable or USB charging cable into the AUX port to act as an antenna.
Step 2: Press the "M" (Mode) button once. You will hear "FM mode."
Step 3: Press the Power button briefly to auto-scan for channels. The speaker will save available stations.
Step 4: Use the Next/Previous buttons to switch between saved stations. TF Card & USB Playback
Simply insert a Micro SD (TF) card or USB drive into the rear slots.
The speaker will automatically switch to "Music Play Mode" and begin playing stored MP3 files. 🔋 Battery & Charging You might need to do this if you’re
features a 1800 mAh lithium battery providing roughly 6–8 hours of playtime.
Low Battery: The indicator light will flash red, and you'll hear "Battery low."
Charging: A steady red light indicates the device is charging.
Full Charge: The red light will turn off. It takes about 3-4 hours to reach 100%.
Maintenance: To preserve lifespan, charge the speaker at least once every 30 days if not in use. 🛠 Troubleshooting Common Issues Cannot Pair: Forget "
" from your phone's Bluetooth list, restart both devices, and try again.
No Sound in FM: Ensure the charging cable is plugged in to serve as an antenna.
Speaker Unresponsive: Some models feature a reset key inside the AUX or charging port area that can be pressed with a small pin.